WA7DEM-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1784772811	13.31 Volts	94.96 Deg.F
1784771014	13.28 Volts	97.6 Deg.F
1784762026	13.52 Volts	107.28 Deg.F
1784751236	14.19 Volts	106.4 Deg.F
1784745857	13.69 Volts	102.88 Deg.F
1784740473	13.64 Volts	104.64 Deg.F
1784729673	13.31 Volts	80 Deg.F
1784727880	13.28 Volts	72.08 Deg.F
1784724295	13.25 Volts	70.32 Deg.F
1784722504	13.28 Volts	70.32 Deg.F
1784717128	13.28 Volts	72.96 Deg.F
1784715337	13.28 Volts	72.96 Deg.F
1784711753	13.28 Volts	73.84 Deg.F
1784709960	13.25 Volts	74.72 Deg.F
1784702788	13.28 Volts	77.36 Deg.F
1784700996	13.28 Volts	78.24 Deg.F
1784699204	13.28 Volts	80 Deg.F
1784697410	13.28 Volts	81.76 Deg.F
1784693829	13.28 Volts	86.16 Deg.F
1784684845	13.31 Volts	101.12 Deg.F
1784675858	13.55 Volts	104.64 Deg.F
1784670463	14.25 Volts	105.52 Deg.F
1784668667	14.25 Volts	103.76 Deg.F
1784661478	13.69 Volts	100.24 Deg.F
1784659680	13.64 Volts	100.24 Deg.F

*Used Equation Coefficients:

Battery: 0, 0.0293, 0.48

Temp: 0, 0.88, -470

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)