OE3PDB-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3PDB-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Rx10m*	Eff1h*
1757520136	12.48 Volt	30 Pkt	2 Pkt	58 Pcnt
1757516532	12.48 Volt	30 Pkt	1 Pkt	59 Pcnt
1757512929	12.48 Volt	40 Pkt	1 Pkt	65 Pcnt
1757509325	12.48 Volt	60 Pkt	1 Pkt	71 Pcnt
1757505722	12.48 Volt	50 Pkt	2 Pkt	64 Pcnt
1757502118	12.48 Volt	50 Pkt	3 Pkt	72 Pcnt
1757498515	12.48 Volt	50 Pkt	2 Pkt	68 Pcnt
1757494911	12.48 Volt	40 Pkt	2 Pkt	72 Pcnt
1757491308	12.48 Volt	80 Pkt	14 Pkt	72 Pcnt
1757487704	12.48 Volt	60 Pkt	6 Pkt	75 Pcnt
1757484101	12.48 Volt	40 Pkt	2 Pkt	60 Pcnt
1757480497	12.48 Volt	50 Pkt	2 Pkt	67 Pcnt
1757476894	12.48 Volt	40 Pkt	2 Pkt	68 Pcnt
1757473290	12.48 Volt	50 Pkt	2 Pkt	75 Pcnt
1757469686	12.48 Volt	50 Pkt	3 Pkt	78 Pcnt
1757466083	12.48 Volt	40 Pkt	2 Pkt	66 Pcnt
1757463080	12.48 Volt	0 Pkt	3 Pkt	42 Pcnt
1757458962	12.48 Volt	50 Pkt	1 Pkt	75 Pcnt
1757455358	12.48 Volt	50 Pkt	2 Pkt	75 Pcnt
1757451755	12.48 Volt	60 Pkt	3 Pkt	72 Pcnt
1757448151	12.48 Volt	60 Pkt	3 Pkt	80 Pcnt
1757444548	12.48 Volt	60 Pkt	1 Pkt	75 Pcnt
1757440944	12.48 Volt	60 Pkt	3 Pkt	75 Pcnt
1757437341	12.48 Volt	60 Pkt	2 Pkt	79 Pcnt
1757433737	12.48 Volt	60 Pkt	3 Pkt	75 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Rx10m: 0, 1, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)