IW6DRY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW6DRY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Tcpu*	Load*	RAM*	Disk*	Uptime*
1773292387	0.62 Rx Erlang	0.01 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773292322	0.62 Rx Erlang	0.04 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773292321	0.62 Rx Erlang	0.04 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773292256	0.62 Rx Erlang	0.06 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773292202	0.62 Rx Erlang	0.05 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773292191	0.62 Rx Erlang	0.04 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773292125	0.62 Rx Erlang	0.04 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773292082	0.62 Rx Erlang	0.01 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773292060	0.62 Rx Erlang	0.01 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291998	0.62 Rx Erlang	0.01 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291962	0.62 Rx Erlang	0.02 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291935	0.01 Rx Erlang	0.16 Tx Erlang	10 count/10m	0 count/10m	103 count/10m
1773291935	0.62 Rx Erlang	0.03 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291875	0.62 Rx Erlang	0.01 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291842	0.62 Rx Erlang	0.03 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291808	0.62 Rx Erlang	0.01 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291743	0.62 Rx Erlang	0.04 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291721	0.62 Rx Erlang	0.06 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291677	0.62 Rx Erlang	0.03 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291612	0.62 Rx Erlang	0.04 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291601	0.62 Rx Erlang	0.04 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291547	0.62 Rx Erlang	0.02 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291482	0.62 Rx Erlang	0.02 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291481	0.62 Rx Erlang	0.02 Tx Erlang	89 count/10m	25 count/10m	30 count/10m
1773291415	0.62 Rx Erlang	0.03 Tx Erlang	89 count/10m	25 count/10m	30 count/10m

*Used Equation Coefficients:

Tcpu: 0, 0.005, 0

Load: 0, 0.005, 0

RAM: 0, 1, 0

Disk: 0, 1, 0

Uptime: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)