IR2UFW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2UFW. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1772603798	14 Pkt	180 Pkt	0 Pkt	0.98 Pcnt	82 Pcnt
1772603498	30 Pkt	180 Pkt	0 Pkt	0.98 Pcnt	80 Pcnt
1772603197	32 Pkt	180 Pkt	1 Pkt	0.98 Pcnt	79 Pcnt
1772602897	26 Pkt	180 Pkt	1 Pkt	0.98 Pcnt	82 Pcnt
1772602597	30 Pkt	190 Pkt	0 Pkt	0.98 Pcnt	81 Pcnt
1772602296	29 Pkt	190 Pkt	0 Pkt	0.98 Pcnt	83 Pcnt
1772601996	26 Pkt	190 Pkt	0 Pkt	0.98 Pcnt	82 Pcnt
1772601696	29 Pkt	190 Pkt	0 Pkt	0.98 Pcnt	82 Pcnt
1772601396	29 Pkt	190 Pkt	0 Pkt	0.98 Pcnt	82 Pcnt
1772601106	31 Pkt	190 Pkt	1 Pkt	0.98 Pcnt	81 Pcnt
1772600795	34 Pkt	190 Pkt	1 Pkt	0.98 Pcnt	81 Pcnt
1772600495	26 Pkt	190 Pkt	0 Pkt	0.98 Pcnt	81 Pcnt
1772600195	18 Pkt	180 Pkt	0 Pkt	0.98 Pcnt	78 Pcnt
1772599894	29 Pkt	180 Pkt	0 Pkt	0.98 Pcnt	81 Pcnt
1772599594	41 Pkt	180 Pkt	0 Pkt	0.98 Pcnt	81 Pcnt
1772599294	36 Pkt	170 Pkt	1 Pkt	0.98 Pcnt	81 Pcnt
1772598993	35 Pkt	170 Pkt	1 Pkt	0.98 Pcnt	83 Pcnt
1772598693	25 Pkt	160 Pkt	0 Pkt	0.98 Pcnt	83 Pcnt
1772598393	22 Pkt	150 Pkt	0 Pkt	0.98 Pcnt	82 Pcnt
1772598093	34 Pkt	160 Pkt	0 Pkt	0.98 Pcnt	83 Pcnt
1772597792	34 Pkt	160 Pkt	0 Pkt	0.98 Pcnt	82 Pcnt
1772597492	24 Pkt	150 Pkt	1 Pkt	0.98 Pcnt	83 Pcnt
1772597197	25 Pkt	150 Pkt	1 Pkt	0.98 Pcnt	82 Pcnt
1772596891	18 Pkt	150 Pkt	0 Pkt	0.98 Pcnt	83 Pcnt
1772596591	18 Pkt	150 Pkt	0 Pkt	0.98 Pcnt	84 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)