NI4CE-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NI4CE-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	Rx1h*	Dg1h*	Eff1h*
1757452662	14.03 Volt	24.5 C	1130 Pkt	370 Pkt	72 Pcnt
1757452662	14.03 Volt	24.5 C	1130 Pkt	370 Pkt	72 Pcnt
1757452362	14.03 Volt	24.5 C	1140 Pkt	370 Pkt	73 Pcnt
1757452062	14.03 Volt	24.5 C	1130 Pkt	370 Pkt	72 Pcnt
1757452062	14.03 Volt	24.5 C	1130 Pkt	370 Pkt	72 Pcnt
1757451762	14.03 Volt	24.5 C	1100 Pkt	370 Pkt	73 Pcnt
1757451462	14.03 Volt	24.5 C	1100 Pkt	370 Pkt	74 Pcnt
1757451462	14.03 Volt	24.5 C	1100 Pkt	370 Pkt	74 Pcnt
1757451162	14.03 Volt	24 C	1070 Pkt	350 Pkt	73 Pcnt
1757450862	14.03 Volt	24.5 C	1050 Pkt	350 Pkt	73 Pcnt
1757450862	14.03 Volt	24.5 C	1050 Pkt	350 Pkt	73 Pcnt
1757450562	14.03 Volt	24 C	1060 Pkt	350 Pkt	72 Pcnt
1757450262	14.03 Volt	24 C	1060 Pkt	350 Pkt	72 Pcnt
1757450262	14.03 Volt	24 C	1060 Pkt	350 Pkt	72 Pcnt
1757449962	14.03 Volt	24.5 C	1050 Pkt	340 Pkt	72 Pcnt
1757449662	14.03 Volt	24.5 C	1030 Pkt	340 Pkt	72 Pcnt
1757449662	14.03 Volt	24.5 C	1030 Pkt	340 Pkt	72 Pcnt
1757449362	14.03 Volt	24.5 C	1030 Pkt	340 Pkt	73 Pcnt
1757449062	13.8 Volt	24.5 C	1020 Pkt	340 Pkt	74 Pcnt
1757449062	13.8 Volt	24.5 C	1020 Pkt	340 Pkt	74 Pcnt
1757448762	14.03 Volt	24.5 C	1030 Pkt	330 Pkt	74 Pcnt
1757448462	14.03 Volt	24.5 C	1020 Pkt	330 Pkt	74 Pcnt
1757448462	14.03 Volt	24.5 C	1020 Pkt	330 Pkt	74 Pcnt
1757448162	14.03 Volt	24.5 C	1030 Pkt	330 Pkt	74 Pcnt
1757447862	14.03 Volt	24.5 C	1020 Pkt	340 Pkt	75 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)