BI1OHC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BI1OHC-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TEMP:*	HUM:*	BARO:*
1754043334	24.17 °C	60 %RH	994 hPa
1754042124	23.23 °C	56 %RH	994 hPa
1754040914	23.57 °C	54 %RH	994 hPa
1754039704	24.02 °C	53 %RH	994 hPa
1754038494	24.04 °C	54 %RH	994 hPa
1754037284	24.02 °C	54 %RH	994 hPa
1754036074	24.05 °C	55 %RH	994 hPa
1754034864	24.04 °C	54 %RH	994 hPa
1754033654	23.87 °C	55 %RH	994 hPa
1754032444	23.44 °C	56 %RH	994 hPa
1754031234	23.13 °C	57 %RH	994 hPa
1754030025	22.98 °C	57 %RH	995 hPa
1754028813	22.73 °C	59 %RH	995 hPa
1754027604	22.68 °C	58 %RH	995 hPa
1754025225	22.37 °C	59 %RH	995 hPa
1754023982	22.47 °C	60 %RH	995 hPa
1754022763	22.44 °C	60 %RH	995 hPa
1754021553	22.29 °C	60 %RH	995 hPa
1754020344	22.01 °C	62 %RH	995 hPa
1754019135	21.77 °C	64 %RH	995 hPa
1754016713	19.14 °C	76 %RH	995 hPa
1753437910	22.78 °C	65 %RH	997 hPa
1753437480	22.19 °C	63 %RH	996 hPa
1753436271	22.2 °C	61 %RH	996 hPa
1753435680	22.02 °C	61 %RH	997 hPa

*Used Equation Coefficients:

TEMP:: 0, 0.01, 0

HUM:: 0, 1, 0

BARO:: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)