IR5AE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR5AE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1765643712	12.95 Volt	960 Pkt	350 Pkt	74 Pcnt	77 Pcnt
1765643111	12.95 Volt	990 Pkt	350 Pkt	75 Pcnt	77 Pcnt
1765642511	12.95 Volt	980 Pkt	340 Pkt	74 Pcnt	77 Pcnt
1765641323	12.95 Volt	1000 Pkt	350 Pkt	74 Pcnt	77 Pcnt
1765640710	13.02 Volt	1010 Pkt	350 Pkt	74 Pcnt	77 Pcnt
1765640111	13.1 Volt	1030 Pkt	360 Pkt	73 Pcnt	77 Pcnt
1765639510	13.1 Volt	1060 Pkt	360 Pkt	73 Pcnt	77 Pcnt
1765638314	13.17 Volt	1120 Pkt	380 Pkt	75 Pcnt	78 Pcnt
1765637115	13.39 Volt	1120 Pkt	370 Pkt	75 Pcnt	78 Pcnt
1765636510	13.54 Volt	1160 Pkt	390 Pkt	76 Pcnt	78 Pcnt
1765635304	13.62 Volt	1170 Pkt	400 Pkt	76 Pcnt	78 Pcnt
1765634718	13.54 Volt	1130 Pkt	400 Pkt	75 Pcnt	78 Pcnt
1765634126	14.06 Volt	1150 Pkt	400 Pkt	76 Pcnt	78 Pcnt
1765632907	14.06 Volt	1020 Pkt	370 Pkt	74 Pcnt	78 Pcnt
1765632301	13.99 Volt	1010 Pkt	370 Pkt	75 Pcnt	78 Pcnt
1765631701	13.69 Volt	990 Pkt	360 Pkt	76 Pcnt	78 Pcnt
1765631115	13.62 Volt	980 Pkt	360 Pkt	76 Pcnt	78 Pcnt
1765629899	13.84 Volt	980 Pkt	360 Pkt	75 Pcnt	78 Pcnt
1765629298	14.21 Volt	1020 Pkt	360 Pkt	76 Pcnt	78 Pcnt
1765628704	13.69 Volt	1010 Pkt	350 Pkt	75 Pcnt	78 Pcnt
1765627497	13.76 Volt	1160 Pkt	380 Pkt	75 Pcnt	78 Pcnt
1765626898	13.69 Volt	1160 Pkt	380 Pkt	75 Pcnt	78 Pcnt
1765626295	13.84 Volt	1160 Pkt	380 Pkt	77 Pcnt	79 Pcnt
1765625697	13.54 Volt	1170 Pkt	390 Pkt	78 Pcnt	79 Pcnt
1765625094	13.69 Volt	1170 Pkt	400 Pkt	78 Pcnt	79 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)