LANEMT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LANEMT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Rx10m*	Dig1h*	Temp*	Vin*
1788604131	390 Pkt	62 Pkt	0 Pck	55.6 F	13.73 Volt
1788602932	370 Pkt	60 Pkt	0 Pck	55.6 F	13.73 Volt
1788601731	370 Pkt	53 Pkt	0 Pck	55.6 F	13.73 Volt
1788600531	370 Pkt	59 Pkt	0 Pck	55.6 F	13.73 Volt
1788599332	380 Pkt	67 Pkt	0 Pck	55.6 F	13.73 Volt
1788598131	380 Pkt	55 Pkt	10 Pck	56.5 F	13.73 Volt
1788596931	400 Pkt	59 Pkt	10 Pck	56.5 F	13.73 Volt
1788594531	400 Pkt	53 Pkt	0 Pck	56.5 F	13.73 Volt
1788593331	400 Pkt	60 Pkt	10 Pck	56.5 F	13.73 Volt
1788592131	400 Pkt	64 Pkt	10 Pck	56.5 F	13.73 Volt
1788590931	440 Pkt	57 Pkt	10 Pck	57.4 F	13.73 Volt
1788589731	440 Pkt	58 Pkt	0 Pck	57.4 F	13.73 Volt
1788588532	460 Pkt	87 Pkt	0 Pck	57.4 F	13.73 Volt
1788587331	470 Pkt	64 Pkt	0 Pck	57.4 F	13.73 Volt
1788586131	470 Pkt	70 Pkt	0 Pck	57.4 F	13.73 Volt
1788584933	450 Pkt	77 Pkt	10 Pck	58.3 F	13.73 Volt
1788583731	470 Pkt	67 Pkt	10 Pck	58.3 F	13.73 Volt
1788582531	490 Pkt	65 Pkt	20 Pck	58.3 F	13.73 Volt
1788581333	490 Pkt	90 Pkt	20 Pck	58.3 F	13.73 Volt
1788580131	490 Pkt	73 Pkt	20 Pck	58.3 F	13.73 Volt
1788578933	480 Pkt	67 Pkt	20 Pck	58.3 F	13.73 Volt
1788577733	470 Pkt	77 Pkt	10 Pck	59.2 F	13.73 Volt
1788576531	450 Pkt	78 Pkt	10 Pck	59.2 F	13.73 Volt
1788575332	460 Pkt	61 Pkt	0 Pck	59.2 F	13.73 Volt
1788574132	480 Pkt	75 Pkt	0 Pck	60.1 F	13.73 Volt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Rx10m: 0, 1, 0

Dig1h: 0, 10, 0

Temp: 0, 0.9, -83

Vin: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)