NS8C-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NS8C-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	-1ft*	-3ft*	-5ft*	Value4*
1761553327	45.75 deg.F	48 deg.F	53.4 deg.F	-15
1761549727	46.2 deg.F	48.45 deg.F	53.4 deg.F	-15
1761546134	46.2 deg.F	48.45 deg.F	53.4 deg.F	-15
1761542527	46.2 deg.F	48.45 deg.F	53.4 deg.F	-15
1761538927	46.2 deg.F	48 deg.F	53.4 deg.F	-15
1761535327	46.2 deg.F	48.45 deg.F	53.4 deg.F	-15
1761531727	46.2 deg.F	48.45 deg.F	53.4 deg.F	-15
1761528127	45.75 deg.F	48 deg.F	53.4 deg.F	-15
1761520927	45.75 deg.F	48.45 deg.F	53.4 deg.F	-15
1761517328	45.75 deg.F	48.9 deg.F	53.4 deg.F	-15
1761513727	45.3 deg.F	48.45 deg.F	53.4 deg.F	-15
1761510127	45.3 deg.F	48.9 deg.F	53.4 deg.F	-15
1761506528	44.85 deg.F	48.45 deg.F	53.4 deg.F	-15
1761502928	44.85 deg.F	48.45 deg.F	53.4 deg.F	-15
1761495727	44.85 deg.F	48.9 deg.F	53.4 deg.F	-15
1761492127	44.85 deg.F	48.9 deg.F	53.4 deg.F	-15
1761488527	45.3 deg.F	48.9 deg.F	53.4 deg.F	-15
1761484928	45.3 deg.F	48.9 deg.F	53.4 deg.F	-15
1761470528	45.75 deg.F	48.45 deg.F	53.85 deg.F	-15
1761466927	45.3 deg.F	48.45 deg.F	53.85 deg.F	-15
1761463327	45.75 deg.F	48.45 deg.F	53.85 deg.F	-15
1761459728	45.75 deg.F	48.9 deg.F	53.85 deg.F	-15
1761456128	45.75 deg.F	48.9 deg.F	53.85 deg.F	-15
1761452527	46.2 deg.F	48.9 deg.F	53.85 deg.F	-15
1761445327	46.2 deg.F	48.9 deg.F	53.85 deg.F	-15

*Used Equation Coefficients:

-1ft: 0, 0.45, -15

-3ft: 0, 0.45, -15

-5ft: 0, 0.45, -15

Value4: 0, 0.45, -15

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)