9A7KXP-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1784672932	12.9 Volt	1500 Pkt	69 Pcnt	8.5 C
1784672633	12.98 Volt	1510 Pkt	69 Pcnt	8.5 C
1784672632	12.98 Volt	1510 Pkt	69 Pcnt	8.5 C
1784672331	12.98 Volt	1510 Pkt	69 Pcnt	8.5 C
1784672032	12.98 Volt	1490 Pkt	69 Pcnt	8.5 C
1784671732	12.98 Volt	1520 Pkt	69 Pcnt	8.5 C
1784671732	12.98 Volt	1520 Pkt	69 Pcnt	8.5 C
1784671432	12.98 Volt	1520 Pkt	69 Pcnt	8.5 C
1784671132	12.98 Volt	1510 Pkt	69 Pcnt	8.5 C
1784670832	12.98 Volt	1550 Pkt	69 Pcnt	8.5 C
1784670832	12.98 Volt	1550 Pkt	69 Pcnt	8.5 C
1784670532	12.98 Volt	1530 Pkt	70 Pcnt	8.5 C
1784670232	12.98 Volt	1510 Pkt	70 Pcnt	8.5 C
1784669934	12.98 Volt	1510 Pkt	69 Pcnt	8.5 C
1784669932	12.98 Volt	1510 Pkt	69 Pcnt	8.5 C
1784669632	12.98 Volt	1500 Pkt	70 Pcnt	8.5 C
1784669332	12.98 Volt	1500 Pkt	69 Pcnt	8.5 C
1784669033	12.98 Volt	1510 Pkt	69 Pcnt	9 C
1784669032	12.98 Volt	1510 Pkt	69 Pcnt	9 C
1784668732	12.98 Volt	1520 Pkt	70 Pcnt	9 C
1784668432	12.98 Volt	1520 Pkt	70 Pcnt	9 C
1784668133	12.98 Volt	1490 Pkt	69 Pcnt	9 C
1784668132	12.98 Volt	1490 Pkt	69 Pcnt	9 C
1784667832	12.98 Volt	1480 Pkt	68 Pcnt	9 C
1784667532	12.98 Volt	1470 Pkt	68 Pcnt	9 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)