Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object VU2FI-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* WiFi* BaudRate*
1765675617 0 Pkt 0 Pkt 0 Pkt 55 dB 9600 bps
1765675017 0 Pkt 0 Pkt 0 Pkt 53 dB 9600 bps
1765674417 0 Pkt 0 Pkt 0 Pkt 57 dB 9600 bps
1765670817 0 Pkt 0 Pkt 0 Pkt 55 dB 9600 bps
1765670217 0 Pkt 0 Pkt 0 Pkt 58 dB 9600 bps
1765669617 0 Pkt 0 Pkt 0 Pkt 56 dB 9600 bps
1765669017 0 Pkt 0 Pkt 0 Pkt 56 dB 9600 bps
1765668417 0 Pkt 0 Pkt 0 Pkt 57 dB 9600 bps
1765667818 0 Pkt 0 Pkt 0 Pkt 55 dB 9600 bps
1765666617 0 Pkt 0 Pkt 0 Pkt 56 dB 9600 bps
1765666017 0 Pkt 0 Pkt 0 Pkt 53 dB 9600 bps
1765665417 0 Pkt 0 Pkt 0 Pkt 54 dB 9600 bps
1765664817 0 Pkt 0 Pkt 0 Pkt 54 dB 9600 bps
1765664217 0 Pkt 0 Pkt 0 Pkt 55 dB 9600 bps
1765663617 0 Pkt 0 Pkt 0 Pkt 57 dB 9600 bps
1765663017 0 Pkt 0 Pkt 0 Pkt 58 dB 9600 bps
1765662417 0 Pkt 0 Pkt 0 Pkt 54 dB 9600 bps
1765661817 0 Pkt 0 Pkt 0 Pkt 57 dB 9600 bps
1765661217 0 Pkt 0 Pkt 0 Pkt 56 dB 9600 bps
1765660628 0 Pkt 0 Pkt 0 Pkt 57 dB 9600 bps
1765660017 0 Pkt 0 Pkt 0 Pkt 56 dB 9600 bps
1765659417 0 Pkt 0 Pkt 0 Pkt 55 dB 9600 bps
1765658817 0 Pkt 0 Pkt 0 Pkt 53 dB 9600 bps
1765658217 0 Pkt 0 Pkt 0 Pkt 55 dB 9600 bps
1765657617 0 Pkt 0 Pkt 0 Pkt 52 dB 9600 bps
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
WiFi: 0, 1, 100
BaudRate: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)