SQ1REX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ1REX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1773045604	48 Deg.C	2 %
1773045001	47 Deg.C	2 %
1773044405	48 Deg.C	2 %
1773043802	47 Deg.C	2 %
1773043205	48 Deg.C	2 %
1773042602	49 Deg.C	2 %
1773042004	49 Deg.C	2 %
1773041402	47 Deg.C	2 %
1773040801	49 Deg.C	2 %
1773040205	50 Deg.C	2 %
1773039601	47 Deg.C	2 %
1773039005	48 Deg.C	2 %
1773038401	47 Deg.C	2 %
1773037805	47 Deg.C	2 %
1773037202	48 Deg.C	2 %
1773036602	47 Deg.C	2 %
1773036005	49 Deg.C	2 %
1773035401	48 Deg.C	2 %
1773034805	49 Deg.C	2 %
1773034201	47 Deg.C	2 %
1773033605	48 Deg.C	2 %
1773033002	49 Deg.C	2 %
1773032401	47 Deg.C	2 %
1773031805	48 Deg.C	2 %
1773031202	47 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)