9A7KXP-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Temp*
1772603982	223 Pkt	1300 Pkt	46 Pkt	6.53 Pcnt	-64 C
1772603682	164 Pkt	1290 Pkt	33 Pkt	6.52 Pcnt	-64 C
1772603382	177 Pkt	1300 Pkt	34 Pkt	6.51 Pcnt	-64 C
1772603082	203 Pkt	1350 Pkt	44 Pkt	6.51 Pcnt	-64 C
1772602782	212 Pkt	1370 Pkt	40 Pkt	6.5 Pcnt	-64 C
1772602183	231 Pkt	1360 Pkt	48 Pkt	6.5 Pcnt	-64 C
1772602182	231 Pkt	1360 Pkt	48 Pkt	6.5 Pcnt	-64 C
1772601882	236 Pkt	1350 Pkt	58 Pkt	6.49 Pcnt	-64 C
1772601582	167 Pkt	1330 Pkt	43 Pkt	6.48 Pcnt	-64 C
1772601282	185 Pkt	1310 Pkt	39 Pkt	6.48 Pcnt	-64 C
1772600982	216 Pkt	1340 Pkt	44 Pkt	6.47 Pcnt	-64 C
1772600682	212 Pkt	1330 Pkt	49 Pkt	6.46 Pcnt	-64 C
1772600388	221 Pkt	1330 Pkt	57 Pkt	6.46 Pcnt	-64 C
1772600082	224 Pkt	1310 Pkt	51 Pkt	6.45 Pcnt	-64 C
1772599782	239 Pkt	1310 Pkt	51 Pkt	6.44 Pcnt	-64 C
1772599482	230 Pkt	1270 Pkt	56 Pkt	6.44 Pcnt	-64 C
1772599182	200 Pkt	1260 Pkt	43 Pkt	6.43 Pcnt	-64 C
1772598882	178 Pkt	1250 Pkt	35 Pkt	6.42 Pcnt	-64 C
1772598582	207 Pkt	1270 Pkt	37 Pkt	6.42 Pcnt	-64 C
1772598282	197 Pkt	1270 Pkt	36 Pkt	6.41 Pcnt	-64 C
1772597982	186 Pkt	1300 Pkt	38 Pkt	6.41 Pcnt	-64 C
1772597682	204 Pkt	1290 Pkt	39 Pkt	6.4 Pcnt	-64 C
1772597382	201 Pkt	1270 Pkt	34 Pkt	6.4 Pcnt	-64 C
1772597082	191 Pkt	1250 Pkt	34 Pkt	6.39 Pcnt	-64 C
1772596783	209 Pkt	1280 Pkt	42 Pkt	6.39 Pcnt	-64 C

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)