This is the latest recevied telemetry packets stored in our database for station/object KN4YDP-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Battery*
Temp*
Value3*
Value4*
Value5*
1762531965
12.2 Volts
25.97 Deg.C
0
0
0
1762531662
12.49 Volts
25.97 Deg.C
0
0
0
1762531541
12.7 Volts
25.48 Deg.C
0
0
0
1762531481
12.82 Volts
24.99 Deg.C
0
0
0
1762531422
12.96 Volts
24.5 Deg.C
0
0
0
1762010145
12.14 Volts
33.79 Deg.C
0
0
0
1762010022
12.23 Volts
32.81 Deg.C
0
0
0
1762009961
12.26 Volts
32.33 Deg.C
0
0
0
1762009903
12.32 Volts
31.84 Deg.C
0
0
0
1762009783
12.47 Volts
30.86 Deg.C
0
0
0
1762009722
12.52 Volts
30.37 Deg.C
0
0
0
1762009482
12.85 Volts
26.95 Deg.C
0
0
0
1762009287
13.32 Volts
23.04 Deg.C
0
0
0
1761924102
12.17 Volts
30.86 Deg.C
0
0
0
1761924040
12.23 Volts
30.86 Deg.C
0
0
0
1761923866
12.41 Volts
29.39 Deg.C
0
0
0
1761923683
12.7 Volts
26.46 Deg.C
0
0
0
1761923622
12.85 Volts
25.48 Deg.C
0
0
0
1761847123
12.67 Volts
24.99 Deg.C
0
0
0
1761846942
13.05 Volts
24.02 Deg.C
0
0
0
1761846821
13.32 Volts
23.04 Deg.C
0
0
0
1761846789
13.4 Volts
22.55 Deg.C
0
0
0
*Used Equation Coefficients:
Battery: 0, 0.02933, 0
Temp: 0, 0.48876, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)