DO6GZ-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO6GZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1761486524	986.1 hPa	26.2 C deg	41.7 %	53 -	0 C deg
1761486474	986 hPa	26.2 C deg	41.7 %	53 -	0 C deg
1761486424	986 hPa	26.2 C deg	41.7 %	53 -	0 C deg
1761486276	986 hPa	26.2 C deg	41.8 %	52 -	0 C deg
1761486193	986 hPa	26.2 C deg	41.9 %	52 -	0 C deg
1761485946	985.9 hPa	26.1 C deg	42 %	51 -	0 C deg
1761485662	985.9 hPa	25.9 C deg	42.2 %	50 -	0 C deg
1761485609	985.9 hPa	25.9 C deg	42.2 %	49 -	0 C deg
1761485511	985.9 hPa	25.9 C deg	42.3 %	49 -	0 C deg
1761485468	985.9 hPa	25.9 C deg	42.3 %	49 -	0 C deg
1761485340	985.8 hPa	25.9 C deg	42.2 %	48 -	0 C deg
1761485305	985.8 hPa	25.9 C deg	42.2 %	47 -	0 C deg
1761485091	985.8 hPa	25.8 C deg	42.5 %	46 -	0 C deg
1761484876	985.7 hPa	25.8 C deg	42.4 %	45 -	0 C deg
1761483522	985.5 hPa	25.9 C deg	44.2 %	34 -	0 C deg
1761483476	985.4 hPa	26 C deg	44.2 %	34 -	0 C deg
1761483428	985.5 hPa	26 C deg	44.2 %	33 -	0 C deg
1761483374	985.5 hPa	26 C deg	44.2 %	33 -	0 C deg
1761483340	985.5 hPa	26 C deg	44.2 %	33 -	0 C deg
1761483224	985.4 hPa	26 C deg	44.1 %	32 -	0 C deg
1761483185	985.4 hPa	26 C deg	44.1 %	32 -	0 C deg
1761483135	985.3 hPa	26 C deg	44.1 %	31 -	0 C deg
1761483080	985.3 hPa	26 C deg	44.1 %	31 -	0 C deg
1761483010	985.3 hPa	26 C deg	44.1 %	30 -	0 C deg
1761482976	985.3 hPa	26 C deg	44.1 %	30 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)