T79PRS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object T79PRS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1765774133	129 Pkt	800 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765773833	123 Pkt	810 Pkt	2 Pkt	0.92 Pcnt	63 Pcnt
1765773533	119 Pkt	810 Pkt	2 Pkt	0.92 Pcnt	63 Pcnt
1765773233	127 Pkt	840 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765772933	114 Pkt	820 Pkt	4 Pkt	0.92 Pcnt	63 Pcnt
1765772656	105 Pkt	830 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765772333	118 Pkt	850 Pkt	2 Pkt	0.92 Pcnt	63 Pcnt
1765772033	123 Pkt	870 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765771733	120 Pkt	880 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765771433	134 Pkt	880 Pkt	2 Pkt	0.92 Pcnt	63 Pcnt
1765771133	148 Pkt	900 Pkt	2 Pkt	0.92 Pcnt	63 Pcnt
1765770833	143 Pkt	890 Pkt	4 Pkt	0.92 Pcnt	63 Pcnt
1765770533	140 Pkt	880 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765770233	155 Pkt	880 Pkt	2 Pkt	0.92 Pcnt	63 Pcnt
1765769933	128 Pkt	870 Pkt	2 Pkt	0.92 Pcnt	63 Pcnt
1765769633	119 Pkt	860 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765769333	135 Pkt	880 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765769033	136 Pkt	870 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765768733	146 Pkt	890 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765768433	126 Pkt	880 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765768133	138 Pkt	880 Pkt	3 Pkt	0.92 Pcnt	63 Pcnt
1765767833	145 Pkt	870 Pkt	2 Pkt	0.92 Pcnt	63 Pcnt
1765767533	134 Pkt	860 Pkt	2 Pkt	0.92 Pcnt	63 Pcnt
1765767233	125 Pkt	840 Pkt	4 Pkt	0.92 Pcnt	63 Pcnt
1765766933	134 Pkt	840 Pkt	4 Pkt	0.92 Pcnt	63 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)