ED1ZBA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED1ZBA-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1776676898	13.62 Volt	230 Pkt	60 Pkt	45 Pcnt
1776675994	13.62 Volt	250 Pkt	70 Pkt	46 Pcnt
1776675094	13.62 Volt	270 Pkt	80 Pkt	50 Pcnt
1776675093	13.62 Volt	270 Pkt	80 Pkt	50 Pcnt
1776674194	13.62 Volt	260 Pkt	80 Pkt	50 Pcnt
1776673294	13.62 Volt	270 Pkt	80 Pkt	52 Pcnt
1776672398	13.62 Volt	260 Pkt	70 Pkt	52 Pcnt
1776671494	13.62 Volt	270 Pkt	70 Pkt	56 Pcnt
1776671493	13.62 Volt	270 Pkt	70 Pkt	56 Pcnt
1776670594	13.62 Volt	260 Pkt	70 Pkt	60 Pcnt
1776669695	13.62 Volt	270 Pkt	80 Pkt	65 Pcnt
1776668794	13.62 Volt	260 Pkt	70 Pkt	69 Pcnt
1776667894	13.62 Volt	240 Pkt	60 Pkt	71 Pcnt
1776667893	13.62 Volt	240 Pkt	60 Pkt	71 Pcnt
1776666994	13.62 Volt	270 Pkt	70 Pkt	75 Pcnt
1776666094	13.54 Volt	290 Pkt	80 Pkt	76 Pcnt
1776665194	13.62 Volt	310 Pkt	100 Pkt	81 Pcnt
1776664297	13.54 Volt	340 Pkt	110 Pkt	83 Pcnt
1776664293	13.54 Volt	340 Pkt	110 Pkt	83 Pcnt
1776663394	13.62 Volt	350 Pkt	110 Pkt	81 Pcnt
1776662500	13.54 Volt	340 Pkt	100 Pkt	84 Pcnt
1776661595	13.62 Volt	310 Pkt	80 Pkt	82 Pcnt
1776660698	13.62 Volt	300 Pkt	80 Pkt	83 Pcnt
1776660694	13.62 Volt	300 Pkt	80 Pkt	83 Pcnt
1776659796	13.54 Volt	270 Pkt	70 Pkt	80 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)