9A4QV-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A4QV-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1761526083	12.38 Volt	1110 Pkt	73 Pcnt	26.86 C°
1761524283	12.38 Volt	1050 Pkt	71 Pcnt	26.86 C°
1761522483	12.38 Volt	1020 Pkt	70 Pcnt	26.86 C°
1761520683	12.38 Volt	1020 Pkt	70 Pcnt	27 C°
1761518883	12.38 Volt	1090 Pkt	69 Pcnt	27 C°
1761517083	12.38 Volt	1170 Pkt	66 Pcnt	27 C°
1761515283	12.38 Volt	1200 Pkt	66 Pcnt	27 C°
1761513483	12.38 Volt	1160 Pkt	67 Pcnt	27 C°
1761511683	12.38 Volt	1140 Pkt	68 Pcnt	27 C°
1761509889	12.38 Volt	1100 Pkt	70 Pcnt	27 C°
1761508083	12.3 Volt	1120 Pkt	71 Pcnt	26.86 C°
1761506283	12.38 Volt	1090 Pkt	70 Pcnt	27 C°
1761504483	12.38 Volt	1030 Pkt	71 Pcnt	27 C°
1761499083	12.38 Volt	1140 Pkt	68 Pcnt	26.86 C°
1761497283	12.38 Volt	1100 Pkt	66 Pcnt	27 C°
1761495483	12.38 Volt	1100 Pkt	68 Pcnt	26.86 C°
1761490084	12.38 Volt	1030 Pkt	62 Pcnt	27 C°
1761488284	12.38 Volt	1090 Pkt	64 Pcnt	26.86 C°
1761486484	12.38 Volt	1110 Pkt	63 Pcnt	26.86 C°
1761484684	12.38 Volt	1030 Pkt	61 Pcnt	26.86 C°
1761482884	12.38 Volt	1050 Pkt	63 Pcnt	26.86 C°
1761481084	12.38 Volt	1120 Pkt	65 Pcnt	26.86 C°
1761479284	12.38 Volt	1120 Pkt	64 Pcnt	26.86 C°
1761477484	12.38 Volt	1070 Pkt	63 Pcnt	27 C°
1761475684	12.38 Volt	1130 Pkt	65 Pcnt	27 C°

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.1444, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)