F5ZMN-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F5ZMN-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Tint*	RHint*
1787587836	27.92 °C	43 %
1787587221	27.69 °C	42 %
1787586606	27.94 °C	46 %
1787585991	27.46 °C	40 %
1787585376	28.4 °C	51 %
1787551255	25.32 °C	59 %
1787550640	25.08 °C	60 %
1787550025	24.57 °C	62 %
1787549409	24.71 °C	60 %
1787487601	26.67 °C	55 %
1787486986	26.54 °C	54 %
1787486371	26.38 °C	55 %
1787485756	26.15 °C	55 %
1787485141	25.98 °C	55 %
1787484527	26 °C	55 %
1787483911	25.89 °C	55 %
1787483296	25.67 °C	56 %
1787482681	25.82 °C	55 %
1787482066	25.81 °C	55 %
1787481451	25.63 °C	55 %
1787480836	25.81 °C	54 %
1787480221	25.7 °C	54 %
1787479606	25.63 °C	54 %
1787478991	25.51 °C	54 %
1787478376	25.48 °C	54 %

*Used Equation Coefficients:

Tint: 0, 1, 0

RHint: 0, 1, 0

Vent: 0, 1, 0

Vppv: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)