SR4NWO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR4NWO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Eff*
1757543805	14.03 Volt	120 Pkt	63 Pcnt	61 Pcnt
1757543205	14.03 Volt	120 Pkt	62 Pcnt	61 Pcnt
1757542605	14.03 Volt	120 Pkt	64 Pcnt	61 Pcnt
1757542306	14.03 Volt	120 Pkt	66 Pcnt	61 Pcnt
1757542005	14.03 Volt	130 Pkt	66 Pcnt	61 Pcnt
1757541405	14.03 Volt	140 Pkt	68 Pcnt	61 Pcnt
1757540813	14.03 Volt	140 Pkt	68 Pcnt	61 Pcnt
1757540205	14.03 Volt	150 Pkt	71 Pcnt	61 Pcnt
1757539606	14.03 Volt	140 Pkt	73 Pcnt	61 Pcnt
1757539605	14.03 Volt	140 Pkt	73 Pcnt	61 Pcnt
1757539005	14.03 Volt	150 Pkt	71 Pcnt	61 Pcnt
1757538405	14.03 Volt	150 Pkt	69 Pcnt	61 Pcnt
1757537805	14.03 Volt	140 Pkt	65 Pcnt	61 Pcnt
1757537205	14.03 Volt	140 Pkt	62 Pcnt	61 Pcnt
1757536906	14.03 Volt	130 Pkt	62 Pcnt	61 Pcnt
1757536605	14.03 Volt	140 Pkt	61 Pcnt	61 Pcnt
1757536005	14.03 Volt	140 Pkt	63 Pcnt	61 Pcnt
1757535405	14.03 Volt	150 Pkt	63 Pcnt	61 Pcnt
1757534806	14.03 Volt	140 Pkt	60 Pcnt	61 Pcnt
1757534206	14.03 Volt	150 Pkt	62 Pcnt	61 Pcnt
1757534205	14.03 Volt	150 Pkt	62 Pcnt	61 Pcnt
1757533606	14.03 Volt	170 Pkt	64 Pcnt	61 Pcnt
1757533006	14.03 Volt	170 Pkt	63 Pcnt	61 Pcnt
1757532405	14.03 Volt	160 Pkt	60 Pcnt	61 Pcnt
1757531806	14.03 Volt	170 Pkt	61 Pcnt	61 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)