DK4HPA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DK4HPA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1778733752	988.9 hPa	23.5 C deg	999.8 hPa	0 C deg
1778731937	988.8 hPa	23.6 C deg	999.6 hPa	0 C deg
1778730122	988.9 hPa	23.5 C deg	999.7 hPa	0 C deg
1778728307	989 hPa	23.7 C deg	999.9 hPa	0 C deg
1778726492	989.2 hPa	24 C deg	1000 hPa	0 C deg
1778724677	989.3 hPa	24.1 C deg	1000.2 hPa	0 C deg
1778722862	989.4 hPa	23.7 C deg	1000.2 hPa	0 C deg
1778721047	989.8 hPa	23.5 C deg	1000.7 hPa	0 C deg
1778719232	989.9 hPa	23.7 C deg	1000.8 hPa	0 C deg
1778717417	990 hPa	23.6 C deg	1000.9 hPa	0 C deg
1778715602	990.2 hPa	23.6 C deg	1001.1 hPa	0 C deg
1778713787	990.4 hPa	23.8 C deg	1001.2 hPa	0 C deg
1778711972	990.8 hPa	23.9 C deg	1001.7 hPa	0 C deg
1778710156	991.1 hPa	24 C deg	1001.9 hPa	0 C deg
1778708342	991.2 hPa	24.1 C deg	1002.1 hPa	0 C deg
1778706526	991.5 hPa	24.1 C deg	1002.3 hPa	0 C deg
1778704711	991.8 hPa	24.2 C deg	1002.6 hPa	0 C deg
1778702896	992.1 hPa	24.1 C deg	1003 hPa	0 C deg
1778701081	992.1 hPa	24.4 C deg	1003 hPa	0 C deg
1778699266	991.7 hPa	24.8 C deg	1002.6 hPa	0 C deg
1778697451	991.8 hPa	24.7 C deg	1002.7 hPa	0 C deg
1778695636	991.8 hPa	24.8 C deg	1002.7 hPa	0 C deg
1778693821	992 hPa	25 C deg	1002.8 hPa	0 C deg
1778693096	991.9 hPa	25.3 C deg	1002.8 hPa	0 C deg
1778691281	992.2 hPa	24.4 C deg	1003.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)