TG5ALY-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TG5ALY-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1762589994	758.1 hPa	14.7 C deg	85.5 %	1028.2 hPa	0 C deg
1762588174	758.2 hPa	14.8 C deg	84.8 %	1028.3 hPa	0 C deg
1762586353	758.4 hPa	14.8 C deg	84.3 %	1028.5 hPa	0 C deg
1762584533	758.7 hPa	14.8 C deg	84.3 %	1029 hPa	0 C deg
1762582712	758.9 hPa	15 C deg	84 %	1029 hPa	0 C deg
1762580891	759.1 hPa	15 C deg	82.5 %	1029.3 hPa	0 C deg
1762579070	759.3 hPa	15.1 C deg	81.5 %	1029.5 hPa	0 C deg
1762577248	759.3 hPa	15.1 C deg	80 %	1029.5 hPa	0 C deg
1762575427	759.4 hPa	17.1 C deg	61.9 %	1027.3 hPa	0 C deg
1762575101	759.5 hPa	17.1 C deg	62.2 %	1027.4 hPa	0 C deg
1762573605	759.4 hPa	17.3 C deg	64 %	1027.3 hPa	0 C deg
1762571784	759.4 hPa	17.3 C deg	65.6 %	1027.1 hPa	0 C deg
1762571127	759.2 hPa	17.4 C deg	65.6 %	1026.8 hPa	0 C deg
1762570286	759.4 hPa	17.5 C deg	64.8 %	1026.9 hPa	0 C deg
1762569981	759.5 hPa	17.5 C deg	64.8 %	1027 hPa	0 C deg
1762569045	759.2 hPa	17.4 C deg	65.3 %	1026.8 hPa	0 C deg
1762568157	759.2 hPa	17.5 C deg	64.6 %	1026.6 hPa	0 C deg
1762567775	759.1 hPa	17.6 C deg	64.1 %	1026.4 hPa	0 C deg
1762566945	759.1 hPa	17.7 C deg	63.7 %	1026.3 hPa	0 C deg
1762566916	759 hPa	17.7 C deg	63.7 %	1026.2 hPa	0 C deg
1762566780	759 hPa	17.7 C deg	63.7 %	1026.2 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)