Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object SV1BYK-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time Vin* Rx1h* Dg1h* Eff1h* A5*
1772660916 14.38 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772660616 14.3 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772660015 14.69 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772659715 14.38 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772659114 14.38 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772658814 14.46 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772658213 14.54 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772657913 14.3 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772657630 14.54 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772657012 14.3 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772656712 14.54 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772656119 14.46 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772655811 14.3 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772655211 14.38 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772654910 14.22 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772654310 14.46 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772654009 14.38 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772653108 14.3 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772652808 14.62 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772652208 14.54 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772651907 14.38 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772651307 14.38 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772651006 14.54 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772650106 14.3 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1772649205 14.3 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)