VK2HFJ-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2HFJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Supply*	Current*	Power*	Core*
1773014586	12.85 VDC	223 mA	2903 mW	61.8 deg.C
1773013686	12.82 VDC	250 mA	2904 mW	63.7 deg.C
1773012787	12.83 VDC	222 mA	2908 mW	62.3 deg.C
1773011887	12.83 VDC	221 mA	2858 mW	61.8 deg.C
1773010987	12.84 VDC	220 mA	2829 mW	60.8 deg.C
1773010086	12.88 VDC	220 mA	2867 mW	56.9 deg.C
1773009187	13.29 VDC	186 mA	2567 mW	56 deg.C
1773008287	12.83 VDC	214 mA	2700 mW	56.9 deg.C
1773007386	12.81 VDC	237 mA	2921 mW	56 deg.C
1773006489	12.56 VDC	202 mA	2609 mW	54 deg.C
1772749087	14.06 VDC	202 mA	2755 mW	56.4 deg.C
1772747288	13.96 VDC	218 mA	2859 mW	55.5 deg.C
1772668986	13.95 VDC	230 mA	3373 mW	64.7 deg.C
1772666287	10.2 VDC	265 mA	2849 mW	64.7 deg.C
1772665387	10.34 VDC	275 mA	2830 mW	63.3 deg.C
1772664487	10.67 VDC	268 mA	2816 mW	62.3 deg.C
1772663587	11.98 VDC	233 mA	2818 mW	60.8 deg.C
1772662687	12.66 VDC	210 mA	2856 mW	57.4 deg.C
1772661787	12.68 VDC	208 mA	2644 mW	57.4 deg.C
1772660887	12.56 VDC	213 mA	2614 mW	57.9 deg.C
1772496186	14.22 VDC	211 mA	3038 mW	60.8 deg.C
1772495286	10.47 VDC	284 mA	3161 mW	60.8 deg.C
1772494387	10.7 VDC	264 mA	3055 mW	60.3 deg.C
1772493487	14.22 VDC	204 mA	3135 mW	60.8 deg.C
1772413387	12.84 VDC	232 mA	2916 mW	60.8 deg.C

*Used Equation Coefficients:

Supply: 0, 1, 0

Current: 0, 1, 0

Power: 0, 1, 0

Core: 0, 0.1, 0

Spare: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)