SR8RJS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8RJS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10min*	Rx1h*	EfTot*
1753699567	14.38 Volt	90 Pkt	30 Pkt	68 Pcnt
1753698667	14.38 Volt	90 Pkt	10 Pkt	66 Pcnt
1753697768	14.38 Volt	40 Pkt	0 Pkt	45 Pcnt
1753697168	14.38 Volt	10 Pkt	0 Pkt	50 Pcnt
1753696022	14.38 Volt	70 Pkt	20 Pkt	69 Pcnt
1753695155	14.38 Volt	30 Pkt	10 Pkt	69 Pcnt
1753694222	14.38 Volt	40 Pkt	0 Pkt	69 Pcnt
1753693322	14.38 Volt	10 Pkt	0 Pkt	69 Pcnt
1753692422	14.38 Volt	0 Pkt	0 Pkt	70 Pcnt
1753690623	14.38 Volt	0 Pkt	0 Pkt	71 Pcnt
1753689723	14.38 Volt	0 Pkt	0 Pkt	71 Pcnt
1753688823	14.38 Volt	0 Pkt	0 Pkt	72 Pcnt
1753687923	14.38 Volt	0 Pkt	0 Pkt	72 Pcnt
1753687023	14.38 Volt	0 Pkt	0 Pkt	73 Pcnt
1753686123	14.38 Volt	0 Pkt	0 Pkt	75 Pcnt
1753685223	14.38 Volt	10 Pkt	10 Pkt	75 Pcnt
1753684323	14.38 Volt	0 Pkt	20 Pkt	75 Pcnt
1753683423	14.38 Volt	10 Pkt	20 Pkt	77 Pcnt
1753682528	14.38 Volt	20 Pkt	30 Pkt	77 Pcnt
1753681623	14.38 Volt	60 Pkt	30 Pkt	78 Pcnt
1753680723	14.38 Volt	50 Pkt	30 Pkt	80 Pcnt
1753679823	14.38 Volt	50 Pkt	30 Pkt	81 Pcnt
1753678923	14.38 Volt	50 Pkt	30 Pkt	81 Pcnt
1753678023	14.38 Volt	50 Pkt	30 Pkt	82 Pcnt
1753677123	14.38 Volt	50 Pkt	30 Pkt	83 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx10min: 0, 10, 0

Rx1h: 0, 10, 0

DIG10m: 0, 1, 0

EfTot: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)