F4IVW-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F4IVW-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Text*	moyT.J*	varT.J*	Tint*	RHint*
1785322330	34.01 C	33.01 C	7.4 C	32.34 C	45 %
1785322013	34.35 C	33.01 C	7.4 C	33.01 C	44 %
1785321694	33.68 C	33.01 C	7.4 C	32.34 C	47 %
1785321374	34.35 C	33.01 C	7.4 C	32.34 C	46 %
1785321068	34.35 C	33.01 C	7.4 C	32.01 C	48 %
1785320739	34.35 C	33.01 C	7.4 C	32.01 C	47 %
1785320419	34.35 C	33.01 C	7.4 C	32.01 C	47 %
1785320106	34.68 C	33.01 C	7.4 C	31.68 C	48 %
1785319787	34.68 C	32.68 C	7.4 C	30.68 C	51 %
1785319467	34.01 C	32.68 C	7.4 C	30.68 C	51 %
1785319164	34.01 C	32.68 C	7.4 C	30.68 C	52 %
1785318843	34.68 C	32.68 C	7.4 C	30.01 C	53 %
1785318197	34.68 C	32.34 C	7.4 C	29.68 C	54 %
1785317877	34.35 C	32.34 C	7.4 C	29.01 C	54 %
1785317560	35.01 C	32.34 C	7.4 C	29.01 C	55 %
1785317243	35.35 C	32.01 C	7.4 C	28.68 C	56 %
1785316936	35.01 C	32.01 C	7.2 C	28.68 C	56 %
1785316607	34.68 C	31.68 C	7 C	28.01 C	57 %
1785316290	34.68 C	31.68 C	6.8 C	28.01 C	58 %
1785315973	34.35 C	31.34 C	6.4 C	27.68 C	59 %
1785315656	34.01 C	31.34 C	6.2 C	27.34 C	59 %
1785315339	33.35 C	31.01 C	5.4 C	27.01 C	61 %
1785315031	32.68 C	31.01 C	5.4 C	26.68 C	63 %
1785314704	32.68 C	30.68 C	5.4 C	26.34 C	64 %
1785314392	33.35 C	30.68 C	5.4 C	26.34 C	64 %

*Used Equation Coefficients:

Text: 0, 0.3334, -25

moyT.J: 0, 0.3334, -25

varT.J: 0, 0.2, 0

Tint: 0, 0.3334, -25

RHint: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)