F6DDS-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F6DDS-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	U*	Rx1h*	Dg1h*	Eff1h*
1776872574	17.85 Volt	240 Pkt	80 Pkt	89 Pcnt
1776872274	18.6 Volt	230 Pkt	80 Pkt	89 Pcnt
1776871974	17.33 Volt	230 Pkt	90 Pkt	89 Pcnt
1776871677	0 Volt	230 Pkt	90 Pkt	90 Pcnt
1776871674	0 Volt	230 Pkt	90 Pkt	90 Pcnt
1776871374	1.28 Volt	240 Pkt	90 Pkt	90 Pcnt
1776871077	16.8 Volt	230 Pkt	90 Pkt	90 Pcnt
1776871074	16.8 Volt	230 Pkt	90 Pkt	90 Pcnt
1776870774	4.65 Volt	230 Pkt	80 Pkt	91 Pcnt
1776870474	0 Volt	220 Pkt	80 Pkt	90 Pcnt
1776870174	3.98 Volt	230 Pkt	80 Pkt	92 Pcnt
1776869874	10.05 Volt	220 Pkt	80 Pkt	92 Pcnt
1776869574	0 Volt	220 Pkt	80 Pkt	92 Pcnt
1776869278	0 Volt	210 Pkt	80 Pkt	92 Pcnt
1776869274	0 Volt	210 Pkt	80 Pkt	92 Pcnt
1776868974	0 Volt	210 Pkt	80 Pkt	92 Pcnt
1776868677	17.78 Volt	200 Pkt	80 Pkt	93 Pcnt
1776868674	17.63 Volt	200 Pkt	80 Pkt	93 Pcnt
1776868374	0 Volt	210 Pkt	80 Pkt	93 Pcnt
1776868074	0 Volt	200 Pkt	80 Pkt	91 Pcnt
1776867774	0 Volt	200 Pkt	80 Pkt	91 Pcnt
1776867478	9.68 Volt	200 Pkt	80 Pkt	91 Pcnt
1776867474	9.68 Volt	200 Pkt	80 Pkt	91 Pcnt
1776867174	0 Volt	210 Pkt	70 Pkt	90 Pcnt
1776866874	0 Volt	200 Pkt	70 Pkt	89 Pcnt

*Used Equation Coefficients:

U: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)