Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object TA5LVC-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time TX* RX* DIGI* CONN* VBAT*
1789958638 2 pkt 0 pkt 0 pkt 1 cnt 0 V
1789958252 5 pkt 0 pkt 0 pkt 1 cnt 0 V
1789957352 2 pkt 0 pkt 0 pkt 1 cnt 0 V
1789929345 2 pkt 0 pkt 0 pkt 1 cnt 0 V
1789928917 3 pkt 0 pkt 0 pkt 1 cnt 4.76 V
1789921967 2 pkt 0 pkt 0 pkt 1 cnt 0 V
1789921579 11 pkt 0 pkt 0 pkt 1 cnt 0 V
1789920679 8 pkt 0 pkt 0 pkt 1 cnt 0 V
1789919779 5 pkt 0 pkt 0 pkt 1 cnt 0 V
1789881352 2 pkt 0 pkt 0 pkt 1 cnt 0 V
1789880520 5 pkt 0 pkt 0 pkt 1 cnt 0 V
1789879444 2 pkt 0 pkt 0 pkt 1 cnt 0 V
1789842525 2 pkt 0 pkt 0 pkt 1 cnt 0 V
1789842244 8 pkt 0 pkt 0 pkt 1 cnt 0 V
1789841524 5 pkt 0 pkt 0 pkt 1 cnt 0 V
1789840194 2 pkt 0 pkt 0 pkt 1 cnt 0 V
1789840050 59 pkt 0 pkt 0 pkt 1 cnt 4.94 V
1789839330 56 pkt 0 pkt 0 pkt 1 cnt 4.79 V
1789838610 53 pkt 0 pkt 0 pkt 1 cnt 4.83 V
1789837890 50 pkt 0 pkt 0 pkt 1 cnt 0 V
1789837170 47 pkt 0 pkt 0 pkt 1 cnt 4.77 V
1789836450 44 pkt 0 pkt 0 pkt 1 cnt 0 V
1789835730 41 pkt 0 pkt 0 pkt 1 cnt 0 V
1789835010 38 pkt 0 pkt 0 pkt 1 cnt 0 V
1789834290 35 pkt 0 pkt 0 pkt 1 cnt 4.2 V
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
DIGI: 0, 1, 0
CONN: 0, 1, 0
VBAT: 0, 0.01, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)