This is the latest recevied telemetry packets stored in our database for station/object ZL3SV-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Value1*
Value2*
Value3*
Value4*
Value5*
1789442546
104
99
255
81
52
1789442540
108
96
255
83
55
1789442534
121
88
255
75
49
1789440227
104
99
255
81
52
1789440046
108
96
255
83
55
1789439453
121
86
255
75
49
1789438014
106
109
255
76
44
1789437833
115
108
255
76
43
1789437652
115
108
255
76
44
1789437109
122
105
255
77
46
1789436928
122
104
255
78
46
1789436747
106
104
255
79
48
1789436566
106
102
255
80
49
1789436385
107
101
255
81
51
1789436204
110
97
255
83
54
1789436022
122
89
255
76
50
1789435204
119
96
255
84
56
1789435023
121
86
255
75
49
1789432708
106
101
255
80
50
1789432346
106
101
255
80
50
1789430129
115
97
255
81
52
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)