H7ONE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object H7ONE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Curr*	Voice*	Temp*
1780562942	12.32 Volt	0.59 A	12.4 Volts	71.6 DegF
1780562642	12.32 Volt	0.59 A	12.4 Volts	71.6 DegF
1780562042	12.4 Volt	0.59 A	12.4 Volts	72.5 DegF
1780561442	12.4 Volt	0.59 A	12.4 Volts	72.5 DegF
1780561143	12.4 Volt	0.59 A	12.4 Volts	72.5 DegF
1780560842	12.4 Volt	0.59 A	12.4 Volts	72.5 DegF
1780560242	12.4 Volt	0.59 A	12.4 Volts	73.4 DegF
1780559642	12.4 Volt	0.59 A	12.4 Volts	73.4 DegF
1780559042	12.4 Volt	0.59 A	12.4 Volts	73.4 DegF
1780558442	12.4 Volt	0.59 A	12.4 Volts	74.3 DegF
1780557842	12.4 Volt	0.59 A	12.4 Volts	74.3 DegF
1780557543	12.4 Volt	0.59 A	12.4 Volts	75.2 DegF
1780557242	12.4 Volt	0.59 A	12.4 Volts	75.2 DegF
1780556642	12.4 Volt	0.59 A	12.4 Volts	76.1 DegF
1780555743	12.4 Volt	0.59 A	12.4 Volts	77 DegF
1780555442	12.4 Volt	0.59 A	12.4 Volts	77 DegF
1780554843	12.4 Volt	0.59 A	12.4 Volts	77.9 DegF
1780554242	12.48 Volt	0.59 A	12.4 Volts	77.9 DegF
1780553943	12.48 Volt	0.59 A	12.4 Volts	77.9 DegF
1780553642	12.48 Volt	0.59 A	12.4 Volts	78.8 DegF
1780553042	12.48 Volt	0.59 A	12.4 Volts	78.8 DegF
1780552442	12.48 Volt	0.59 A	12.4 Volts	78.8 DegF
1780552143	12.48 Volt	0.59 A	12.4 Volts	79.7 DegF
1780551842	12.48 Volt	0.59 A	12.4 Volts	79.7 DegF
1780551242	12.48 Volt	0.59 A	12.4 Volts	79.7 DegF

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Curr: 0, 0.1953, -24.8031

Solar: 0, 0.1, 0

Voice: 0, 0.1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)