PI1SHB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PI1SHB. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1753564911	0.03 Rx Erlang	0.01 Tx Erlang	23 count/10m	23 count/10m	11 count/10m
1753563711	0.03 Rx Erlang	0.02 Tx Erlang	27 count/10m	27 count/10m	16 count/10m
1753562511	0.03 Rx Erlang	0.02 Tx Erlang	25 count/10m	25 count/10m	13 count/10m
1753561311	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	27 count/10m	12 count/10m
1753560111	0.03 Rx Erlang	0.02 Tx Erlang	25 count/10m	25 count/10m	13 count/10m
1753558911	0.03 Rx Erlang	0.02 Tx Erlang	28 count/10m	28 count/10m	14 count/10m
1753557711	0.03 Rx Erlang	0.01 Tx Erlang	23 count/10m	23 count/10m	11 count/10m
1753556511	0.02 Rx Erlang	0.02 Tx Erlang	19 count/10m	19 count/10m	14 count/10m
1753555311	0.02 Rx Erlang	0.01 Tx Erlang	23 count/10m	23 count/10m	13 count/10m
1753554111	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	18 count/10m	11 count/10m
1753552911	0.04 Rx Erlang	0.02 Tx Erlang	30 count/10m	30 count/10m	14 count/10m
1753551711	0.04 Rx Erlang	0.02 Tx Erlang	29 count/10m	29 count/10m	13 count/10m
1753550511	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	20 count/10m	11 count/10m
1753549311	0.03 Rx Erlang	0.02 Tx Erlang	25 count/10m	25 count/10m	13 count/10m
1753548111	0.03 Rx Erlang	0.02 Tx Erlang	24 count/10m	24 count/10m	15 count/10m
1753546911	0.03 Rx Erlang	0.02 Tx Erlang	21 count/10m	21 count/10m	13 count/10m
1753545711	0.03 Rx Erlang	0.02 Tx Erlang	27 count/10m	27 count/10m	16 count/10m
1753544521	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	28 count/10m	14 count/10m
1753543311	0.03 Rx Erlang	0.02 Tx Erlang	28 count/10m	28 count/10m	15 count/10m
1753542111	0.03 Rx Erlang	0.02 Tx Erlang	30 count/10m	30 count/10m	16 count/10m
1753540911	0.02 Rx Erlang	0.02 Tx Erlang	20 count/10m	20 count/10m	14 count/10m
1753539711	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	14 count/10m	12 count/10m
1753538511	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	17 count/10m	13 count/10m
1753537311	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	18 count/10m	13 count/10m
1753536111	0.02 Rx Erlang	0.02 Tx Erlang	14 count/10m	14 count/10m	14 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)