N1DTA-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1DTA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1781390908	14.1 Volt	820 Pkt	200 Pkt	65 Pcnt
1781390907	14.1 Volt	820 Pkt	200 Pkt	65 Pcnt
1781390607	14.18 Volt	810 Pkt	200 Pkt	64 Pcnt
1781390308	13.95 Volt	800 Pkt	200 Pkt	64 Pcnt
1781390307	13.95 Volt	800 Pkt	200 Pkt	64 Pcnt
1781390007	13.88 Volt	790 Pkt	210 Pkt	64 Pcnt
1781389708	13.95 Volt	770 Pkt	200 Pkt	64 Pcnt
1781389707	13.95 Volt	770 Pkt	200 Pkt	64 Pcnt
1781389407	13.73 Volt	770 Pkt	200 Pkt	64 Pcnt
1781389109	13.8 Volt	730 Pkt	200 Pkt	63 Pcnt
1781389107	13.8 Volt	730 Pkt	200 Pkt	63 Pcnt
1781388807	13.65 Volt	730 Pkt	190 Pkt	64 Pcnt
1781388508	13.95 Volt	710 Pkt	190 Pkt	63 Pcnt
1781388507	13.95 Volt	710 Pkt	190 Pkt	63 Pcnt
1781388207	13.58 Volt	700 Pkt	190 Pkt	62 Pcnt
1781387910	13.58 Volt	680 Pkt	190 Pkt	63 Pcnt
1781387907	13.58 Volt	680 Pkt	190 Pkt	63 Pcnt
1781387607	13.73 Volt	680 Pkt	190 Pkt	63 Pcnt
1781387308	14.1 Volt	690 Pkt	190 Pkt	62 Pcnt
1781387307	14.1 Volt	690 Pkt	190 Pkt	62 Pcnt
1781387007	13.8 Volt	670 Pkt	190 Pkt	61 Pcnt
1781386708	13.95 Volt	680 Pkt	180 Pkt	61 Pcnt
1781386707	13.95 Volt	680 Pkt	180 Pkt	61 Pcnt
1781386407	13.58 Volt	680 Pkt	190 Pkt	62 Pcnt
1781386108	13.65 Volt	690 Pkt	180 Pkt	61 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)