LZ0PRC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0PRC. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin:*	Temp:*	EffTo*	Eff1h*
1784688289	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784687689	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784687089	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784686489	13.8 Volt	1280 °C	21 Pcnt	0 Pcnt
1784685889	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784685289	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784684689	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784684089	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784683490	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784682890	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784682290	13.8 Volt	1280 °C	21 Pcnt	2 Pcnt
1784681690	13.88 Volt	1280 °C	21 Pcnt	2 Pcnt
1784681090	13.88 Volt	1280 °C	21 Pcnt	2 Pcnt
1784680490	13.88 Volt	1280 °C	21 Pcnt	6 Pcnt
1784679890	13.88 Volt	1280 °C	21 Pcnt	4 Pcnt
1784679290	13.88 Volt	1280 °C	21 Pcnt	4 Pcnt
1784678690	13.88 Volt	1280 °C	21 Pcnt	3 Pcnt
1784678090	13.88 Volt	1280 °C	21 Pcnt	3 Pcnt
1784677490	13.88 Volt	1280 °C	21 Pcnt	3 Pcnt
1784676890	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784676290	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784675690	13.88 Volt	1280 °C	21 Pcnt	0 Pcnt
1784675090	13.88 Volt	1280 °C	21 Pcnt	2 Pcnt
1784674490	13.88 Volt	1280 °C	21 Pcnt	4 Pcnt
1784673890	13.88 Volt	1280 °C	21 Pcnt	4 Pcnt

*Used Equation Coefficients:

Vin:: 0, 0.075, 0

Temp:: 0, 10, 0

Rx1h: 0, 10, 0

EffTo: 0, 1, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)