WA2NDV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA2NDV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1789954766	319 Pkts	306 Pkts	61 Pkts	20 C
1789951166	162 Pkts	154 Pkts	61 Pkts	20 C
1789947566	124 Pkts	117 Pkts	56 Pkts	20 C
1789943966	198 Pkts	188 Pkts	99 Pkts	20 C
1789940366	159 Pkts	146 Pkts	81 Pkts	20 C
1789936766	192 Pkts	186 Pkts	82 Pkts	20 C
1789933166	193 Pkts	186 Pkts	78 Pkts	20 C
1789929566	166 Pkts	156 Pkts	79 Pkts	19 C
1789925966	130 Pkts	119 Pkts	59 Pkts	19 C
1789922366	291 Pkts	282 Pkts	65 Pkts	19 C
1789918766	362 Pkts	356 Pkts	43 Pkts	20 C
1789915166	255 Pkts	248 Pkts	78 Pkts	19 C
1789911566	296 Pkts	289 Pkts	100 Pkts	20 C
1789907966	251 Pkts	243 Pkts	139 Pkts	19 C
1789904366	282 Pkts	274 Pkts	123 Pkts	20 C
1789900766	260 Pkts	250 Pkts	108 Pkts	20 C
1789897166	248 Pkts	235 Pkts	110 Pkts	20 C
1789893566	223 Pkts	210 Pkts	90 Pkts	19 C
1789889966	243 Pkts	235 Pkts	85 Pkts	20 C
1789886366	223 Pkts	215 Pkts	72 Pkts	20 C
1789882766	239 Pkts	233 Pkts	70 Pkts	19 C
1789879166	211 Pkts	208 Pkts	54 Pkts	19 C
1789875566	176 Pkts	170 Pkts	40 Pkts	20 C
1789871966	159 Pkts	155 Pkts	32 Pkts	19 C
1789868366	205 Pkts	199 Pkts	46 Pkts	19 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)