NI4CE-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NI4CE-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	Rx1h*	Dg1h*	Eff1h*
1772642270	13.8 Volt	25 C	690 Pkt	260 Pkt	67 Pcnt
1772641972	13.8 Volt	25 C	690 Pkt	260 Pkt	66 Pcnt
1772641970	13.8 Volt	25 C	690 Pkt	260 Pkt	66 Pcnt
1772641670	13.8 Volt	25 C	690 Pkt	260 Pkt	67 Pcnt
1772641372	14.03 Volt	24.5 C	670 Pkt	260 Pkt	66 Pcnt
1772641370	14.03 Volt	24.5 C	670 Pkt	260 Pkt	66 Pcnt
1772641070	13.88 Volt	25 C	680 Pkt	260 Pkt	66 Pcnt
1772640770	14.03 Volt	25 C	660 Pkt	250 Pkt	66 Pcnt
1772640470	14.03 Volt	24.5 C	650 Pkt	250 Pkt	64 Pcnt
1772640171	13.95 Volt	25 C	650 Pkt	240 Pkt	64 Pcnt
1772640170	13.95 Volt	25 C	650 Pkt	240 Pkt	64 Pcnt
1772639870	13.88 Volt	25 C	650 Pkt	250 Pkt	65 Pcnt
1772639572	14.03 Volt	24.5 C	650 Pkt	240 Pkt	65 Pcnt
1772639570	14.03 Volt	24.5 C	650 Pkt	240 Pkt	65 Pcnt
1772639270	14.03 Volt	24 C	650 Pkt	240 Pkt	65 Pcnt
1772638971	14.03 Volt	24 C	640 Pkt	230 Pkt	64 Pcnt
1772638970	14.03 Volt	24 C	640 Pkt	230 Pkt	64 Pcnt
1772638670	13.88 Volt	24.5 C	650 Pkt	240 Pkt	64 Pcnt
1772638372	14.03 Volt	24.5 C	650 Pkt	240 Pkt	64 Pcnt
1772638370	14.03 Volt	24.5 C	650 Pkt	240 Pkt	64 Pcnt
1772638070	13.95 Volt	24.5 C	650 Pkt	230 Pkt	63 Pcnt
1772637772	14.03 Volt	25 C	640 Pkt	230 Pkt	63 Pcnt
1772637770	14.03 Volt	25 C	640 Pkt	230 Pkt	63 Pcnt
1772637470	13.95 Volt	24.5 C	650 Pkt	230 Pkt	63 Pcnt
1772637171	14.03 Volt	25 C	640 Pkt	220 Pkt	62 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)