HB9EAS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9EAS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Rx10m*	Eff1h*	Eff*
1765559757	12.09 Volt	580 Pkt	93 Pkt	75 Pcnt	78 Pcnt
1765559456	12.09 Volt	590 Pkt	91 Pkt	75 Pcnt	78 Pcnt
1765559156	12.09 Volt	590 Pkt	88 Pkt	74 Pcnt	78 Pcnt
1765558856	12.09 Volt	600 Pkt	93 Pkt	74 Pcnt	78 Pcnt
1765558555	12.01 Volt	610 Pkt	97 Pkt	75 Pcnt	78 Pcnt
1765558255	12.09 Volt	610 Pkt	103 Pkt	75 Pcnt	78 Pcnt
1765557955	12.09 Volt	620 Pkt	97 Pkt	75 Pcnt	78 Pcnt
1765557655	12.09 Volt	630 Pkt	101 Pkt	76 Pcnt	78 Pcnt
1765557354	12.09 Volt	640 Pkt	101 Pkt	77 Pcnt	78 Pcnt
1765557054	12.09 Volt	630 Pkt	106 Pkt	79 Pcnt	78 Pcnt
1765556754	12.09 Volt	640 Pkt	108 Pkt	79 Pcnt	78 Pcnt
1765556453	12.09 Volt	630 Pkt	102 Pkt	78 Pcnt	78 Pcnt
1765556178	12.09 Volt	620 Pkt	95 Pkt	78 Pcnt	78 Pcnt
1765555853	12.09 Volt	620 Pkt	99 Pkt	78 Pcnt	78 Pcnt
1765555553	12.09 Volt	630 Pkt	106 Pkt	79 Pcnt	78 Pcnt
1765555252	12.09 Volt	630 Pkt	104 Pkt	79 Pcnt	78 Pcnt
1765554952	12.09 Volt	620 Pkt	106 Pkt	79 Pcnt	78 Pcnt
1765554652	12.09 Volt	610 Pkt	118 Pkt	78 Pcnt	78 Pcnt
1765554351	12.09 Volt	600 Pkt	122 Pkt	78 Pcnt	78 Pcnt
1765553751	12.09 Volt	580 Pkt	99 Pkt	77 Pcnt	78 Pcnt
1765553450	12.09 Volt	590 Pkt	99 Pkt	76 Pcnt	78 Pcnt
1765553150	12.09 Volt	580 Pkt	92 Pkt	77 Pcnt	78 Pcnt
1765552850	12.09 Volt	580 Pkt	89 Pkt	77 Pcnt	78 Pcnt
1765552550	12.09 Volt	580 Pkt	103 Pkt	76 Pcnt	78 Pcnt
1765552249	12.09 Volt	580 Pkt	118 Pkt	76 Pcnt	78 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.077, 0

Rx1h: 0, 10, 0

Rx10m: 0, 1, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)