Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object LU7FDV-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* RSSI* Voltage*
1782532698 16 Pkt 0 Pkt 0 Pkt -76 dBm 14.58 V
1782531752 15 Pkt 0 Pkt 0 Pkt -76 dBm 14.6 V
1782530830 15 Pkt 0 Pkt 0 Pkt -75 dBm 14.6 V
1782529908 15 Pkt 0 Pkt 0 Pkt -76 dBm 14.6 V
1782528986 15 Pkt 0 Pkt 0 Pkt -75 dBm 14.58 V
1782528064 15 Pkt 2 Pkt 0 Pkt -76 dBm 14.6 V
1782527141 15 Pkt 0 Pkt 0 Pkt -77 dBm 14.6 V
1782526220 13 Pkt 4 Pkt 0 Pkt -76 dBm 14.6 V
1782525297 14 Pkt 0 Pkt 0 Pkt -79 dBm 14.58 V
1782524375 15 Pkt 0 Pkt 0 Pkt -75 dBm 14.58 V
1782523453 14 Pkt 1 Pkt 0 Pkt -76 dBm 14.58 V
1782522530 15 Pkt 3 Pkt 0 Pkt -77 dBm 14.58 V
1782521608 15 Pkt 2 Pkt 0 Pkt -76 dBm 14.58 V
1782520686 15 Pkt 0 Pkt 0 Pkt -75 dBm 14.58 V
1782519764 16 Pkt 5 Pkt 0 Pkt -75 dBm 14.58 V
1782518841 15 Pkt 1 Pkt 0 Pkt -75 dBm 14.58 V
1782517919 16 Pkt 0 Pkt 0 Pkt -74 dBm 14.58 V
1782516997 15 Pkt 0 Pkt 0 Pkt -75 dBm 14.58 V
1782516123 14 Pkt 0 Pkt 0 Pkt -76 dBm 14.58 V
1782515153 16 Pkt 0 Pkt 0 Pkt -76 dBm 14.58 V
1782514231 15 Pkt 0 Pkt 0 Pkt -76 dBm 14.56 V
1782513309 15 Pkt 1 Pkt 0 Pkt -74 dBm 14.56 V
1782512387 15 Pkt 0 Pkt 0 Pkt -76 dBm 14.58 V
1782511465 9 Pkt 0 Pkt 0 Pkt -76 dBm 14.58 V
1782510542 0 Pkt 1 Pkt 0 Pkt -77 dBm 14.58 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)