IK2CHZ-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK2CHZ-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Dg10m*
1761514660	13.73 Volt	50 Pkt	14 Pcnt	0 Pkt
1761514060	13.8 Volt	50 Pkt	15 Pcnt	0 Pkt
1761512860	13.8 Volt	70 Pkt	19 Pcnt	0 Pkt
1761512260	13.8 Volt	70 Pkt	20 Pcnt	0 Pkt
1761511660	13.8 Volt	80 Pkt	21 Pcnt	0 Pkt
1761511060	13.8 Volt	90 Pkt	23 Pcnt	0 Pkt
1761510460	13.8 Volt	90 Pkt	22 Pcnt	0 Pkt
1761509860	13.8 Volt	90 Pkt	19 Pcnt	0 Pkt
1761509260	13.8 Volt	90 Pkt	17 Pcnt	0 Pkt
1761508660	13.8 Volt	90 Pkt	16 Pcnt	0 Pkt
1761508060	13.8 Volt	90 Pkt	15 Pcnt	0 Pkt
1761507460	13.8 Volt	90 Pkt	15 Pcnt	0 Pkt
1761506860	13.8 Volt	110 Pkt	16 Pcnt	0 Pkt
1761506260	13.8 Volt	140 Pkt	20 Pcnt	0 Pkt
1761505660	13.8 Volt	190 Pkt	24 Pcnt	0 Pkt
1761505060	13.8 Volt	230 Pkt	26 Pcnt	3 Pkt
1761504463	13.8 Volt	240 Pkt	27 Pcnt	0 Pkt
1761503860	13.8 Volt	260 Pkt	28 Pcnt	1 Pkt
1761503260	13.8 Volt	260 Pkt	28 Pcnt	0 Pkt
1761502660	13.8 Volt	270 Pkt	28 Pcnt	2 Pkt
1761501461	13.8 Volt	260 Pkt	28 Pcnt	0 Pkt
1761500861	13.8 Volt	270 Pkt	28 Pcnt	0 Pkt
1761500261	13.8 Volt	270 Pkt	29 Pcnt	0 Pkt
1761499661	13.8 Volt	270 Pkt	30 Pcnt	0 Pkt
1761499061	13.8 Volt	230 Pkt	30 Pcnt	0 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)