KD5NDU-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KD5NDU-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1789954328	13.65 Volt	10 Pkt	10 Pkt	81 Pcnt
1789954327	13.65 Volt	10 Pkt	10 Pkt	81 Pcnt
1789954027	13.65 Volt	10 Pkt	10 Pkt	80 Pcnt
1789953727	13.65 Volt	10 Pkt	10 Pkt	80 Pcnt
1789953427	13.65 Volt	10 Pkt	10 Pkt	80 Pcnt
1789953134	13.58 Volt	10 Pkt	10 Pkt	100 Pcnt
1789953134	13.58 Volt	10 Pkt	10 Pkt	100 Pcnt
1789952827	13.65 Volt	10 Pkt	10 Pkt	100 Pcnt
1789952528	13.58 Volt	10 Pkt	10 Pkt	100 Pcnt
1789952527	13.58 Volt	10 Pkt	10 Pkt	100 Pcnt
1789952227	13.58 Volt	10 Pkt	10 Pkt	100 Pcnt
1789951928	13.65 Volt	10 Pkt	10 Pkt	100 Pcnt
1789951927	13.65 Volt	10 Pkt	10 Pkt	100 Pcnt
1789951627	13.65 Volt	10 Pkt	10 Pkt	100 Pcnt
1789951327	13.73 Volt	10 Pkt	10 Pkt	100 Pcnt
1789951027	13.8 Volt	10 Pkt	10 Pkt	94 Pcnt
1789950728	13.73 Volt	10 Pkt	10 Pkt	94 Pcnt
1789950727	13.73 Volt	10 Pkt	10 Pkt	94 Pcnt
1789950427	13.73 Volt	10 Pkt	10 Pkt	94 Pcnt
1789950128	13.73 Volt	10 Pkt	10 Pkt	90 Pcnt
1789950127	13.73 Volt	10 Pkt	10 Pkt	90 Pcnt
1789949827	13.65 Volt	10 Pkt	10 Pkt	90 Pcnt
1789949528	13.65 Volt	10 Pkt	10 Pkt	90 Pcnt
1789949527	13.65 Volt	10 Pkt	10 Pkt	90 Pcnt
1789949227	13.65 Volt	10 Pkt	10 Pkt	90 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)