9H1US-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9H1US-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1756352690	12.8 Volts	38.83 Deg.C
1756352570	12.8 Volts	38.83 Deg.C
1756352329	12.8 Volts	38.83 Deg.C
1756352209	12.8 Volts	38.34 Deg.C
1756352088	12.8 Volts	38.83 Deg.C
1756351968	12.8 Volts	38.83 Deg.C
1756351848	12.8 Volts	38.83 Deg.C
1756351727	12.8 Volts	38.83 Deg.C
1756351607	12.8 Volts	38.83 Deg.C
1756351487	12.8 Volts	38.83 Deg.C
1756351366	12.8 Volts	38.83 Deg.C
1756351246	12.8 Volts	38.83 Deg.C
1756351126	12.8 Volts	38.83 Deg.C
1756351005	12.8 Volts	38.83 Deg.C
1756350885	12.8 Volts	38.83 Deg.C
1756350765	12.8 Volts	38.83 Deg.C
1756350645	12.8 Volts	38.83 Deg.C
1756350524	12.8 Volts	38.83 Deg.C
1756350404	12.8 Volts	38.83 Deg.C
1756350284	12.8 Volts	38.83 Deg.C
1756350163	12.8 Volts	38.83 Deg.C
1756350043	12.8 Volts	38.83 Deg.C
1756349923	12.8 Volts	38.83 Deg.C
1756349822	12.8 Volts	38.83 Deg.C
1756349682	12.8 Volts	38.83 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)