DJ8HS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DJ8HS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Rx10m*	Eff1h*
1784675189	13.83 Volt	460 Pkt	720 Pkt	95 Pcnt
1784674889	13.83 Volt	470 Pkt	780 Pkt	96 Pcnt
1784674588	13.83 Volt	470 Pkt	760 Pkt	96 Pcnt
1784674288	13.83 Volt	470 Pkt	790 Pkt	96 Pcnt
1784673988	13.83 Volt	470 Pkt	790 Pkt	96 Pcnt
1784673688	13.83 Volt	460 Pkt	740 Pkt	97 Pcnt
1784673387	13.83 Volt	460 Pkt	770 Pkt	96 Pcnt
1784673087	13.83 Volt	470 Pkt	780 Pkt	97 Pcnt
1784672787	13.83 Volt	470 Pkt	700 Pkt	97 Pcnt
1784672486	13.83 Volt	480 Pkt	850 Pkt	96 Pcnt
1784672186	13.83 Volt	480 Pkt	900 Pkt	96 Pcnt
1784671886	13.83 Volt	470 Pkt	770 Pkt	97 Pcnt
1784671585	13.83 Volt	480 Pkt	790 Pkt	97 Pcnt
1784671285	13.83 Volt	480 Pkt	810 Pkt	97 Pcnt
1784670985	13.83 Volt	470 Pkt	730 Pkt	97 Pcnt
1784670685	13.83 Volt	470 Pkt	720 Pkt	97 Pcnt
1784670384	13.83 Volt	470 Pkt	780 Pkt	96 Pcnt
1784670084	13.83 Volt	470 Pkt	780 Pkt	96 Pcnt
1784669784	13.83 Volt	470 Pkt	880 Pkt	96 Pcnt
1784669483	13.83 Volt	460 Pkt	880 Pkt	96 Pcnt
1784669183	13.83 Volt	460 Pkt	730 Pkt	96 Pcnt
1784668883	13.83 Volt	450 Pkt	760 Pkt	96 Pcnt
1784668582	13.83 Volt	440 Pkt	930 Pkt	95 Pcnt
1784668282	13.83 Volt	440 Pkt	870 Pkt	95 Pcnt
1784667982	13.83 Volt	440 Pkt	680 Pkt	94 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Rx10m: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)