SV3GCB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SV3GCB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1784721889	13.5 Volt	170 Pkt	40 Pkt	97 Pcnt	92 Pcnt
1784711078	13.5 Volt	210 Pkt	60 Pkt	97 Pcnt	92 Pcnt
1784700268	13.5 Volt	270 Pkt	70 Pkt	97 Pcnt	92 Pcnt
1784689458	13.43 Volt	90 Pkt	60 Pkt	93 Pcnt	92 Pcnt
1784657027	13.43 Volt	220 Pkt	60 Pkt	92 Pcnt	92 Pcnt
1784646216	13.5 Volt	180 Pkt	60 Pkt	97 Pcnt	92 Pcnt
1784635406	13.35 Volt	170 Pkt	60 Pkt	99 Pcnt	92 Pcnt
1784624596	13.43 Volt	180 Pkt	60 Pkt	100 Pcnt	92 Pcnt
1784613785	13.5 Volt	220 Pkt	70 Pkt	98 Pcnt	92 Pcnt
1784602975	13.58 Volt	80 Pkt	40 Pkt	97 Pcnt	92 Pcnt
1784570544	13.65 Volt	220 Pkt	80 Pkt	83 Pcnt	92 Pcnt
1784559735	13.65 Volt	200 Pkt	70 Pkt	96 Pcnt	92 Pcnt
1784548924	13.58 Volt	210 Pkt	50 Pkt	98 Pcnt	92 Pcnt
1784538113	13.58 Volt	230 Pkt	70 Pkt	99 Pcnt	92 Pcnt
1784527303	13.43 Volt	200 Pkt	80 Pkt	93 Pcnt	92 Pcnt
1784516495	13.5 Volt	80 Pkt	50 Pkt	91 Pcnt	92 Pcnt
1784484062	13.65 Volt	320 Pkt	120 Pkt	91 Pcnt	92 Pcnt
1784473251	13.65 Volt	310 Pkt	100 Pkt	96 Pcnt	92 Pcnt
1784462441	13.65 Volt	220 Pkt	60 Pkt	97 Pcnt	92 Pcnt
1784451632	13.73 Volt	240 Pkt	80 Pkt	97 Pcnt	92 Pcnt
1784440820	13.65 Volt	210 Pkt	60 Pkt	94 Pcnt	92 Pcnt
1784430010	13.65 Volt	100 Pkt	60 Pkt	100 Pcnt	92 Pcnt
1784397579	13.58 Volt	350 Pkt	130 Pkt	93 Pcnt	92 Pcnt
1784386770	13.58 Volt	240 Pkt	70 Pkt	97 Pcnt	92 Pcnt
1784375960	13.58 Volt	190 Pkt	60 Pkt	95 Pcnt	92 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)