SP8SD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8SD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Eff*
1785284466	9.32 Volt	40 Pkt	93 Pcnt	66 Pcnt
1785284465	9.32 Volt	40 Pkt	93 Pcnt	66 Pcnt
1785284166	9.32 Volt	40 Pkt	91 Pcnt	66 Pcnt
1785283866	9.32 Volt	40 Pkt	92 Pcnt	65 Pcnt
1785283566	9.32 Volt	40 Pkt	92 Pcnt	65 Pcnt
1785283265	9.32 Volt	40 Pkt	93 Pcnt	65 Pcnt
1785282666	9.32 Volt	40 Pkt	97 Pcnt	65 Pcnt
1785282065	9.32 Volt	40 Pkt	95 Pcnt	65 Pcnt
1785280865	9.32 Volt	40 Pkt	95 Pcnt	64 Pcnt
1785280566	9.32 Volt	40 Pkt	97 Pcnt	64 Pcnt
1785280266	9.32 Volt	30 Pkt	95 Pcnt	64 Pcnt
1785279966	9.32 Volt	30 Pkt	95 Pcnt	64 Pcnt
1785279665	9.32 Volt	40 Pkt	93 Pcnt	64 Pcnt
1785278766	9.32 Volt	30 Pkt	92 Pcnt	63 Pcnt
1785278465	9.32 Volt	30 Pkt	94 Pcnt	63 Pcnt
1785277265	9.32 Volt	30 Pkt	87 Pcnt	62 Pcnt
1785276065	9.32 Volt	40 Pkt	89 Pcnt	62 Pcnt
1785274865	9.32 Volt	40 Pkt	85 Pcnt	61 Pcnt
1785273701	9.32 Volt	50 Pkt	81 Pcnt	61 Pcnt
1785272465	9.32 Volt	50 Pkt	75 Pcnt	60 Pcnt
1785271265	9.32 Volt	50 Pkt	73 Pcnt	59 Pcnt
1785270366	9.32 Volt	50 Pkt	73 Pcnt	59 Pcnt
1785270099	9.32 Volt	50 Pkt	73 Pcnt	59 Pcnt
1785269466	9.32 Volt	40 Pkt	66 Pcnt	59 Pcnt
1785268865	9.32 Volt	40 Pkt	65 Pcnt	58 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)