VA7GFZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA7GFZ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1780566126	11.8 Volt	250 Pkt	69 Pcnt	56.3 F
1780565798	11.8 Volt	240 Pkt	68 Pcnt	56.3 F
1780565797	11.8 Volt	240 Pkt	68 Pcnt	56.3 F
1780565497	11.8 Volt	240 Pkt	67 Pcnt	56.3 F
1780565198	11.8 Volt	230 Pkt	66 Pcnt	56.3 F
1780565197	11.8 Volt	230 Pkt	66 Pcnt	56.3 F
1780564897	11.8 Volt	230 Pkt	66 Pcnt	56.3 F
1780564598	11.8 Volt	220 Pkt	65 Pcnt	57.2 F
1780564597	11.8 Volt	220 Pkt	65 Pcnt	57.2 F
1780564297	11.8 Volt	220 Pkt	66 Pcnt	57.2 F
1780563998	11.8 Volt	220 Pkt	65 Pcnt	57.2 F
1780563997	11.8 Volt	220 Pkt	65 Pcnt	57.2 F
1780563697	11.8 Volt	220 Pkt	65 Pcnt	57.2 F
1780563398	11.8 Volt	230 Pkt	65 Pcnt	57.2 F
1780563397	11.8 Volt	230 Pkt	65 Pcnt	57.2 F
1780563097	11.8 Volt	230 Pkt	63 Pcnt	57.2 F
1780562798	11.8 Volt	220 Pkt	64 Pcnt	57.2 F
1780562797	11.8 Volt	220 Pkt	64 Pcnt	57.2 F
1780562497	11.8 Volt	230 Pkt	64 Pcnt	57.2 F
1780562198	11.8 Volt	240 Pkt	65 Pcnt	57.2 F
1780562197	11.8 Volt	240 Pkt	65 Pcnt	57.2 F
1780561598	11.8 Volt	240 Pkt	64 Pcnt	58.1 F
1780561597	11.8 Volt	240 Pkt	64 Pcnt	58.1 F
1780561297	11.8 Volt	250 Pkt	62 Pcnt	58.1 F
1780560998	11.8 Volt	250 Pkt	63 Pcnt	58.1 F

*Used Equation Coefficients:

Vin: 0, 0.1, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)