WR7DW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WR7DW-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1785328914	13.2 Volt	570 Pkt	160 Pkt	78 Pcnt	16 C
1785325321	13.2 Volt	490 Pkt	140 Pkt	79 Pcnt	16 C
1785321719	13.2 Volt	530 Pkt	140 Pkt	79 Pcnt	16.5 C
1785318123	13.2 Volt	530 Pkt	140 Pkt	77 Pcnt	17 C
1785314525	13.28 Volt	530 Pkt	150 Pkt	80 Pcnt	17 C
1785310924	13.28 Volt	490 Pkt	120 Pkt	81 Pcnt	17.5 C
1785307319	13.28 Volt	470 Pkt	120 Pkt	77 Pcnt	18 C
1785303717	13.28 Volt	450 Pkt	100 Pkt	76 Pcnt	18.5 C
1785300122	13.28 Volt	440 Pkt	110 Pkt	76 Pcnt	19 C
1785296528	13.35 Volt	450 Pkt	110 Pkt	81 Pcnt	19 C
1785292921	13.35 Volt	460 Pkt	120 Pkt	82 Pcnt	19 C
1785289322	13.5 Volt	630 Pkt	160 Pkt	81 Pcnt	18.5 C
1785285722	13.58 Volt	450 Pkt	100 Pkt	84 Pcnt	18 C
1785282118	13.8 Volt	450 Pkt	100 Pkt	79 Pcnt	17.5 C
1785278516	14.1 Volt	460 Pkt	120 Pkt	80 Pcnt	17 C
1785274922	14.4 Volt	430 Pkt	100 Pkt	79 Pcnt	16.5 C
1785271317	14.33 Volt	460 Pkt	110 Pkt	79 Pcnt	16.5 C
1785267718	14.4 Volt	470 Pkt	110 Pkt	78 Pcnt	16 C
1785264122	14.4 Volt	530 Pkt	120 Pkt	75 Pcnt	16 C
1785260524	14.48 Volt	590 Pkt	160 Pkt	76 Pcnt	15.5 C
1785253323	13.5 Volt	520 Pkt	110 Pkt	76 Pcnt	15 C
1785249717	13.28 Volt	530 Pkt	110 Pkt	71 Pcnt	15 C
1785246119	13.2 Volt	530 Pkt	110 Pkt	72 Pcnt	15 C
1785242519	13.2 Volt	470 Pkt	100 Pkt	72 Pcnt	15 C
1785238926	13.2 Volt	450 Pkt	110 Pkt	80 Pcnt	15.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)