W9MCP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W9MCP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1784694204	12.3 Volt	360 Pkt	20 Pkt	79 Pcnt	18.5 C
1784694202	12.3 Volt	360 Pkt	20 Pkt	79 Pcnt	18.5 C
1784693902	12.3 Volt	360 Pkt	20 Pkt	79 Pcnt	18.5 C
1784693602	12.3 Volt	360 Pkt	20 Pkt	80 Pcnt	18.5 C
1784693302	12.3 Volt	380 Pkt	20 Pkt	80 Pcnt	18.5 C
1784693002	12.3 Volt	380 Pkt	20 Pkt	78 Pcnt	18.5 C
1784693002	12.3 Volt	380 Pkt	20 Pkt	78 Pcnt	18.5 C
1784692702	12.3 Volt	390 Pkt	20 Pkt	78 Pcnt	18.5 C
1784692402	12.3 Volt	380 Pkt	20 Pkt	78 Pcnt	18.5 C
1784692102	12.3 Volt	370 Pkt	20 Pkt	77 Pcnt	18.5 C
1784691803	12.3 Volt	360 Pkt	20 Pkt	77 Pcnt	18.5 C
1784691802	12.3 Volt	360 Pkt	20 Pkt	77 Pcnt	18.5 C
1784691502	12.3 Volt	360 Pkt	20 Pkt	76 Pcnt	18.5 C
1784691203	12.3 Volt	360 Pkt	20 Pkt	74 Pcnt	18.5 C
1784691202	12.3 Volt	360 Pkt	20 Pkt	74 Pcnt	18.5 C
1784690902	12.3 Volt	360 Pkt	20 Pkt	74 Pcnt	18.5 C
1784690603	12.3 Volt	350 Pkt	20 Pkt	74 Pcnt	18.5 C
1784690602	12.3 Volt	350 Pkt	20 Pkt	74 Pcnt	18.5 C
1784690302	12.3 Volt	350 Pkt	20 Pkt	75 Pcnt	18.5 C
1784690003	12.3 Volt	340 Pkt	20 Pkt	75 Pcnt	18.5 C
1784690002	12.3 Volt	340 Pkt	20 Pkt	75 Pcnt	18.5 C
1784689702	12.3 Volt	320 Pkt	20 Pkt	76 Pcnt	19 C
1784689403	12.3 Volt	320 Pkt	30 Pkt	78 Pcnt	19 C
1784689402	12.3 Volt	320 Pkt	30 Pkt	78 Pcnt	19 C
1784689102	12.3 Volt	320 Pkt	30 Pkt	79 Pcnt	19 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)