OE8LCK-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE8LCK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1765593927	11.33 Volt	360 Pkt	180 Pkt	85 Pcnt
1765593628	11.33 Volt	360 Pkt	180 Pkt	86 Pcnt
1765593627	11.33 Volt	360 Pkt	180 Pkt	86 Pcnt
1765593327	11.33 Volt	360 Pkt	180 Pkt	85 Pcnt
1765593028	11.33 Volt	360 Pkt	180 Pkt	86 Pcnt
1765593027	11.33 Volt	360 Pkt	180 Pkt	86 Pcnt
1765592727	11.33 Volt	350 Pkt	180 Pkt	85 Pcnt
1765592429	11.33 Volt	350 Pkt	180 Pkt	85 Pcnt
1765592427	11.33 Volt	350 Pkt	180 Pkt	85 Pcnt
1765592127	11.33 Volt	340 Pkt	170 Pkt	85 Pcnt
1765591828	11.33 Volt	340 Pkt	170 Pkt	84 Pcnt
1765591827	11.33 Volt	340 Pkt	170 Pkt	84 Pcnt
1765591527	11.33 Volt	340 Pkt	170 Pkt	84 Pcnt
1765591228	11.33 Volt	340 Pkt	170 Pkt	85 Pcnt
1765591227	11.33 Volt	340 Pkt	170 Pkt	85 Pcnt
1765590927	11.33 Volt	330 Pkt	160 Pkt	84 Pcnt
1765590628	11.33 Volt	340 Pkt	170 Pkt	85 Pcnt
1765590627	11.33 Volt	340 Pkt	170 Pkt	85 Pcnt
1765590327	11.33 Volt	340 Pkt	170 Pkt	85 Pcnt
1765590044	11.33 Volt	330 Pkt	170 Pkt	85 Pcnt
1765590044	11.33 Volt	330 Pkt	170 Pkt	85 Pcnt
1765589727	11.33 Volt	340 Pkt	170 Pkt	86 Pcnt
1765589428	11.33 Volt	350 Pkt	170 Pkt	86 Pcnt
1765589427	11.33 Volt	350 Pkt	170 Pkt	86 Pcnt
1765589127	11.33 Volt	350 Pkt	170 Pkt	88 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)