IW2DFH-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW2DFH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*
1757603119	1 Pkt/10m	1 Pkt/10m	3.78 Volt
1757599574	8 Pkt/10m	8 Pkt/10m	3.78 Volt
1757596030	15 Pkt/10m	15 Pkt/10m	3.76 Volt
1757592486	14 Pkt/10m	13 Pkt/10m	3.82 Volt
1757588942	17 Pkt/10m	17 Pkt/10m	3.8 Volt
1757585397	21 Pkt/10m	21 Pkt/10m	3.76 Volt
1757581866	18 Pkt/10m	18 Pkt/10m	3.76 Volt
1757578323	8 Pkt/10m	8 Pkt/10m	3.78 Volt
1757574765	7 Pkt/10m	7 Pkt/10m	3.76 Volt
1757571221	7 Pkt/10m	7 Pkt/10m	3.78 Volt
1757567676	17 Pkt/10m	15 Pkt/10m	3.78 Volt
1757564132	31 Pkt/10m	16 Pkt/10m	3.8 Volt
1757560588	24 Pkt/10m	19 Pkt/10m	3.76 Volt
1757557044	30 Pkt/10m	14 Pkt/10m	3.8 Volt
1757553500	32 Pkt/10m	15 Pkt/10m	3.78 Volt
1757549955	31 Pkt/10m	14 Pkt/10m	3.78 Volt
1757546411	66 Pkt/10m	66 Pkt/10m	3.76 Volt
1757542867	11 Pkt/10m	11 Pkt/10m	3.8 Volt
1757539323	1 Pkt/10m	1 Pkt/10m	3.8 Volt
1757535779	25 Pkt/10m	24 Pkt/10m	3.8 Volt
1757532234	22 Pkt/10m	19 Pkt/10m	3.78 Volt
1757528690	28 Pkt/10m	27 Pkt/10m	3.76 Volt
1757525146	48 Pkt/10m	42 Pkt/10m	3.8 Volt
1757521602	14 Pkt/10m	14 Pkt/10m	3.76 Volt
1757518058	10 Pkt/10m	10 Pkt/10m	3.76 Volt

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)