BRIVER Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BRIVER. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Eff1h*	Temp*	Vin*
1788604341	170 Pkt	60 Pcnt	65.5 F	13.45 Volt
1788604041	180 Pkt	62 Pcnt	65.5 F	13.45 Volt
1788603742	190 Pkt	66 Pcnt	65.5 F	13.45 Volt
1788603741	190 Pkt	66 Pcnt	65.5 F	13.45 Volt
1788603441	190 Pkt	67 Pcnt	65.5 F	13.45 Volt
1788603141	190 Pkt	69 Pcnt	65.5 F	13.45 Volt
1788602842	200 Pkt	72 Pcnt	66.4 F	13.45 Volt
1788602841	200 Pkt	72 Pcnt	66.4 F	13.45 Volt
1788602541	210 Pkt	73 Pcnt	65.5 F	13.45 Volt
1788602241	210 Pkt	73 Pcnt	66.4 F	13.45 Volt
1788601942	210 Pkt	75 Pcnt	66.4 F	13.45 Volt
1788601941	210 Pkt	75 Pcnt	66.4 F	13.45 Volt
1788601641	220 Pkt	77 Pcnt	65.5 F	13.45 Volt
1788601341	230 Pkt	78 Pcnt	66.4 F	13.45 Volt
1788601042	220 Pkt	80 Pcnt	66.4 F	13.45 Volt
1788601041	220 Pkt	80 Pcnt	66.4 F	13.45 Volt
1788600741	220 Pkt	79 Pcnt	66.4 F	13.45 Volt
1788600441	210 Pkt	80 Pcnt	66.4 F	13.45 Volt
1788600142	220 Pkt	80 Pcnt	66.4 F	13.45 Volt
1788600141	220 Pkt	80 Pcnt	66.4 F	13.45 Volt
1788599841	220 Pkt	80 Pcnt	66.4 F	13.45 Volt
1788599541	220 Pkt	81 Pcnt	66.4 F	13.45 Volt
1788599242	220 Pkt	80 Pcnt	66.4 F	13.45 Volt
1788599241	220 Pkt	80 Pcnt	66.4 F	13.45 Volt
1788598941	220 Pkt	80 Pcnt	66.4 F	13.38 Volt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83

Vin: 0, 0.075, -0.5

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)