Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object DB0MGN-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time Vin* Rx1h* Dg1h* Eff1h* Temp*
1776673117 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776672817 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776672517 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776672217 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776671917 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776671617 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776671317 13.65 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776671017 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776670717 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776670417 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776670117 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776669817 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776669517 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776669217 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776668917 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776668617 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776668317 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776668017 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776667717 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776667417 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776667117 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776666817 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776666517 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776666217 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1776665917 13.73 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)